N-[3-(dimethylamino)propyl]dodecanamide N-oxide (CAS 61792-31-2): Properties, Molar Dosing and a Sourcing Checklist
N-[3-(dimethylamino)propyl]dodecanamide N-oxide (CAS 61792-31-2; InChIKey RFHSGBFHVGQXHD-UHFFFAOYSA-N) is a chemical raw material used in Industrial Chemicals, with formula C17H36N2O2 and molecular weight 300.5 g/mol. This page lists database-verifiable properties, what those values imply for formulation and QC, and a specification checklist for Industrial Chemicals applications.
Key takeaways
- XLogP = 4.7 indicates lipophilic behaviour: poor aqueous dispersion requires a matched solvent, emulsifier or carrier, and direct addition to water risks precipitation or phase separation.
- TPSA 42 Ų and 1 H-bond donors / 3 acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils.
- Molecular weight 300.5 g/mol: 1 mol = 300.5 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 300.277678395 supports HRMS identification (add a proton for [M+H]+).
- InChIKey RFHSGBFHVGQXHD-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.
Published properties of N-[3-(dimethylamino)propyl]dodecanamide N-oxide (by CAS 61792-31-2)
| Property | Value |
|---|---|
| Molecular formula | C17H36N2O2 |
| Molecular weight | 300.5 g/mol |
| Accurate mass | 300.277678395 |
| IUPAC name | N-[3-(dimethylamino)propyl]-1-oxododecan-1-amine oxide |
| InChIKey | RFHSGBFHVGQXHD-UHFFFAOYSA-N |
| XLogP | 4.7 |
| Topological polar surface area | 41.8 Ų |
| H-bond donors / acceptors | 1 / 3 |
| Rotatable bonds | 14 |
| Heavy atoms | 21 |
Computed values above: PubChem CID 21117028; melting/boiling points, where shown, come from the site product page.
What the numbers mean in practice
| Aspect | Evidence and actionable conclusion |
|---|---|
| Solubility & compatibility | XLogP = 4.7 indicates lipophilic behaviour: poor aqueous dispersion requires a matched solvent, emulsifier or carrier, and direct addition to water risks precipitation or phase separation. |
| Molecular polarity | TPSA 42 Ų and 1 H-bond donors / 3 acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils. |
| Dosing & analytical checks | Molecular weight 300.5 g/mol: 1 mol = 300.5 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 300.277678395 supports HRMS identification (add a proton for [M+H]+). |
| Substance identity | InChIKey RFHSGBFHVGQXHD-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups. |
| Crystallisation & incoming QC | 14 rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay. |
Specification checklist for Industrial Chemicals use
| Check | Why it matters | How to verify |
|---|---|---|
| Batch baseline (CAS 61792-31-2) | Product-specific values to check line by line against the COA and specification; salts and hydrates differ | 分子量 300.5 g/mol; XLogP 4.7; TPSA 42 Ų; InChIKey RFHSGBFHVGQXHD-UHFFFAOYSA-N |
| Specification & method | Assay basis can differ for the same name | State indices, test method and acceptance rules in the contract |
| Impurities & lot consistency | Trace impurities often explain performance differences | Request impurity profiles and recent COAs; compare key indices |
| Identity check | Same-name, salt-form and hydrate confusion causes dosing errors | Cross-check CAS and InChIKey; confirm by spectroscopy where needed |
| Packaging, storage & retest | Transit conditions change the state on arrival | Check SDS storage and retest date; retain and retest on arrival |
Frequently asked questions
What are the formula, molecular weight and identifiers of N-[3-(dimethylamino)propyl]dodecanamide N-oxide (CAS 61792-31-2)?
Formula C17H36N2O2, molecular weight 300.5 g/mol; accurate mass 300.277678395. CAS 61792-31-2 resolves the substance across PubChem and ChemSpider; InChIKey RFHSGBFHVGQXHD-UHFFFAOYSA-N distinguishes same-name substances, salts and hydrates. Use the molecular weight for stoichiometric conversion; purity and grade follow the batch COA.
Is N-[3-(dimethylamino)propyl]dodecanamide N-oxide suitable for Industrial Chemicals applications, and what should be checked first?
Three checks: (1) the regulatory grade and production licence for the intended use; (2) impurity and safety indices plus test methods on the batch COA; (3) identity via CAS and substance identifiers to rule out hydrate/anhydrous or salt/free-form mix-ups. With XLogP 4.7 and TPSA 42 Ų, validate aqueous versus oil-phase dispersion by a bench test before fixing the addition method.
How is the dosage of N-[3-(dimethylamino)propyl]dodecanamide N-oxide calculated from molecular weight?
At 300.5 g/mol, 1 mol = 300.5 g. Blending, substitution and neutralisation should be calculated on molar equivalence, not by substituting mass parts of a related material. For hydrates or salts, adjust for active content and water of crystallisation from the COA.
What incoming-QC tests apply to N-[3-(dimethylamino)propyl]dodecanamide N-oxide on arrival?
At minimum: match the COA lot to the goods; retest assay and loss on drying / water; confirm identity via InChIKey RFHSGBFHVGQXHD-UHFFFAOYSA-N or spectroscopy; retain a sample with opening conditions logged. Caking, colour shift or a broad melting range should trigger polymorph and residual-solvent checks.
Related materials
- n-Butyllithium(CAS 109-72-8):CAS 109-72-8: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
- n-Octylamine(CAS 111-86-4):shares the 'ylamin' core; before substituting, check the CAS and molecular-weight gap, as salt formation adds a counter-ion
- N,N-Diethylhydroxylamine(CAS 3710-84-7):belongs to the same 'ylamin' series — confirm it is the same CAS; salt and free-form assays are not interchangeable by mass
- N-(3-Aminopropyl)imidazole(CAS 5036-48-6):shares the 'aminopropyl' parent fragment — compare formula and molecular weight to identify salt, ester or hydrate form
- N-[3-(dimethylamino)propyl]stearamide(CAS 7651-02-7):shares the 'n[3dimethylaminopropyl]' core; before substituting, check the CAS and molecular-weight gap, as salt formation adds a counter-ion
- N-Vinyl-2-pyrrolidone(CAS 88-12-0):CAS 88-12-0: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing
For side-by-side comparison see site search for N-[3-(dimethylamino)propyl]dodecanamide N-oxide, or browse the Organic Chemicals directory.
Supply & compliance
Jinan Shenghe Chemical Co., Ltd. supplies industrial and fine chemicals. When enquiring, state the product name, CAS, target grade and packaging; COA, SDS and technical data sheets are available with the shipment. Contact: info@chemsp.cn | +86-18553102138. This page is technical information for industrial raw materials; regulated food, feed, cosmetic or pharmaceutical uses require the corresponding grade and compliance with local rules.
Data sources
Source: PubChem computed properties, CID 21117028 (https://pubchem.ncbi.nlm.nih.gov/compound/21117028), accessed 2026-11-21; melting/boiling points, where shown, come from the site product page. Hydrates and salts carry different values — verify by CAS and InChIKey.