Potassium chloride (CAS 7447-40-7): Properties, Molar Dosing and a Sourcing Checklist
Potassium chloride (CAS 7447-40-7; InChIKey WCUXLLCKKVVCTQ-UHFFFAOYSA-M) is a chemical raw material used in Industrial Chemicals, with formula ClK and molecular weight 74.55 g/mol. This page lists database-verifiable properties, what those values imply for formulation and QC, and a specification checklist for Industrial Chemicals applications.
Key takeaways
- TPSA Ų and H-bond donors / 1 acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils.
- Molecular weight 74.55 g/mol: 1 mol = 74.55 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 73.9325592 supports HRMS identification (add a proton for [M+H]+).
- InChIKey WCUXLLCKKVVCTQ-UHFFFAOYSA-M is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.
- rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay.
Published properties of Potassium chloride (by CAS 7447-40-7)
| Property | Value |
|---|---|
| Molecular formula | ClK |
| Molecular weight | 74.55 g/mol |
| Accurate mass | 73.9325592 |
| IUPAC name | potassium chloride |
| InChIKey | WCUXLLCKKVVCTQ-UHFFFAOYSA-M |
| Topological polar surface area | 0 Ų |
| H-bond donors / acceptors | 0 / 1 |
| Rotatable bonds | 0 |
| Heavy atoms | 2 |
| Melting point (product page) | 1418 °C |
| Boiling point (product page) | 1500 °C |
Computed values above: PubChem CID 4873; melting/boiling points, where shown, come from the site product page.
What the numbers mean in practice
| Aspect | Evidence and actionable conclusion |
|---|---|
| Molecular polarity | TPSA Ų and H-bond donors / 1 acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils. |
| Dosing & analytical checks | Molecular weight 74.55 g/mol: 1 mol = 74.55 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 73.9325592 supports HRMS identification (add a proton for [M+H]+). |
| Substance identity | InChIKey WCUXLLCKKVVCTQ-UHFFFAOYSA-M is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups. |
| Crystallisation & incoming QC | rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay. |
Specification checklist for Industrial Chemicals use
| Check | Why it matters | How to verify |
|---|---|---|
| Batch baseline (CAS 7447-40-7) | Product-specific values to check line by line against the COA and specification; salts and hydrates differ | 分子量 74.55 g/mol; InChIKey WCUXLLCKKVVCTQ-UHFFFAOYSA-M |
| Specification & method | Assay basis can differ for the same name | State indices, test method and acceptance rules in the contract |
| Impurities & lot consistency | Trace impurities often explain performance differences | Request impurity profiles and recent COAs; compare key indices |
| Identity check | Same-name, salt-form and hydrate confusion causes dosing errors | Cross-check CAS and InChIKey; confirm by spectroscopy where needed |
| Packaging, storage & retest | Transit conditions change the state on arrival | Check SDS storage and retest date; retain and retest on arrival |
Frequently asked questions
What are the formula, molecular weight and identifiers of Potassium chloride (CAS 7447-40-7)?
Formula ClK, molecular weight 74.55 g/mol; accurate mass 73.9325592. CAS 7447-40-7 resolves the substance across PubChem and ChemSpider; InChIKey WCUXLLCKKVVCTQ-UHFFFAOYSA-M distinguishes same-name substances, salts and hydrates. Use the molecular weight for stoichiometric conversion; purity and grade follow the batch COA.
Is Potassium chloride suitable for Industrial Chemicals applications, and what should be checked first?
Three checks: (1) the regulatory grade and production licence for the intended use; (2) impurity and safety indices plus test methods on the batch COA; (3) identity via CAS and substance identifiers to rule out hydrate/anhydrous or salt/free-form mix-ups. With limited published property data, determine solubility and addition method by bench testing rather than inference from related materials.
How is the dosage of Potassium chloride calculated from molecular weight?
At 74.55 g/mol, 1 mol = 74.55 g. Blending, substitution and neutralisation should be calculated on molar equivalence, not by substituting mass parts of a related material. For hydrates or salts, adjust for active content and water of crystallisation from the COA.
What incoming-QC tests apply to Potassium chloride on arrival?
At minimum: match the COA lot to the goods; retest assay and loss on drying / water; confirm identity via InChIKey WCUXLLCKKVVCTQ-UHFFFAOYSA-M or spectroscopy; retain a sample with opening conditions logged. Caking, colour shift or a broad melting range should trigger polymorph and residual-solvent checks.
Related materials
- potassium 1 2 naphthoquinone 4 sulfonic acid(CAS 5908-27-0):CAS 5908-27-0: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
- potassium 1 1 2 2 3 3 4 4 5 5 6 6 7 7 7 pentadecafluorohepta(CAS 60270-55-5):CAS 60270-55-5: a separate CAS entry; compare impurity limits and packaging conditions for Industrial Chemicals use
- potassium 1 2 3 6 tetrahydro 5 nitro 2 6 dioxopyrimidine 4 c(CAS 60779-49-9):CAS 60779-49-9: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing
- potassium 1 2 3 6 tetrahydro 5 nitro 2 6 dioxopyrimidine 4 c(CAS 65717-13-7):CAS 65717-13-7: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
- potassium 1 2 bis 2 ethylhexyloxycarbonyl ethanesulphonate(CAS 7491-09-0):CAS 7491-09-0: a separate CAS entry; compare impurity limits and packaging conditions for Industrial Chemicals use
- potassium 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12(CAS 85187-17-3):CAS 85187-17-3: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing
For side-by-side comparison see site search for Potassium chloride, or browse the Organic Chemicals directory.
Supply & compliance
Jinan Shenghe Chemical Co., Ltd. supplies industrial and fine chemicals. When enquiring, state the product name, CAS, target grade and packaging; COA, SDS and technical data sheets are available with the shipment. Contact: info@chemsp.cn | +86-18553102138. This page is technical information for industrial raw materials; regulated food, feed, cosmetic or pharmaceutical uses require the corresponding grade and compliance with local rules.
Data sources
Source: PubChem computed properties, CID 4873 (https://pubchem.ncbi.nlm.nih.gov/compound/4873), accessed 2026-11-15; melting/boiling points, where shown, come from the site product page. Hydrates and salts carry different values — verify by CAS and InChIKey.
Related Products
- potassium 1 2 naphthoquinone 4 sulfonic acid (CAS 5908-27-0)
- potassium 1 1 2 2 3 3 4 4 5 5 6 6 7 7 7 pentadecafluorohepta (CAS 60270-55-5)
- potassium 1 2 3 6 tetrahydro 5 nitro 2 6 dioxopyrimidine 4 c (CAS 60779-49-9)
- potassium 1 2 3 6 tetrahydro 5 nitro 2 6 dioxopyrimidine 4 c (CAS 65717-13-7)
- potassium 1 2 bis 2 ethylhexyloxycarbonyl ethanesulphonate (CAS 7491-09-0)
- potassium 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 (CAS 85187-17-3)