N-[2,4-dimethyl-5-(trifluoromethylsulfonylamino)phenyl]acetamide: 2-(2 -hydroxyethylamino)ethanol (CAS 53780-36-2) — formula C15H24F3N3O5S, molecular weight 415.4; category organic chemicals.
| CAS Number | 53780-36-2 |
|---|---|
| Molecular Formula | C15H24F3N3O5S |
| Molecular Weight | 415.4 |
| Melting Point | 106-108 °C |
| LogP | Kow = 3.2X10-2 at 25 °C. |
| Applications | Uses: Used as an anilide post-emergence plant growth regulator to suppress seed heads and fruiting and to slow plant growth to reduce maintenance, Registered for non-crop land (i.e. industrial, roadside, and public areas) and residential turf, Multiple products also contain additional plant growth regulators or herbicides (i.e. Paclobutrazol and Imazapyr), [Reference #1] Used as intermediate, [3M MSDS], No registered food, feed uses and no food tolerances in the US, [Reference #1], Using Disinfectants or Biocides [Category: Clean], Farming (Pesticides) [Category: Industry], For mefluidide diethanolamine salt (USEPA, OPP Pesticide Code: 114002) ACTIVE products with label matches., SRP: Registered for use in the USA but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses., Mefluidide is a plant growth regulator that is applied postemergence when needed, and is a member of the anilide class of compounds. It is used to suppress seed heads and fruiting, as well as retarding growth to reduce mowing and trimming. It is also registered for growth control of low maintenance turf on rights-of-ways, airports, public and industrial sites. Mefluidide products can also be used on residential lawns. There are no registered food, feed uses, and no food tolerances exist for mefluidide., Formulations, Preparations: Embark 2-S Plant Growth Regulator (PBI, Gordon Corporation): Active ingredient: mefluidide, diethanolamine salt 28.0%., Mefluidide 2-S Concentrate (PBI, Embark E-Z-TU-Use Plant Growth Regulator (PBI, diethanolamine salt 3.2%., EH 1135 PGR (PBI, diethanolamine salt 21.45%, imazapyr 0.15%, and imazethapyr, ammonium salt 4.09%., U.S. Production: Non-confidential 2016 Chemical Data Reporting (CDR) information on the production and use of chemicals manufactured or imported into the United States. Chemical: Mefluidine diethanolamine:, Table: National Aggregate Production Volume (pounds) [Table#8499], General Manufacturing Information: Mefluidide, mefluidide diethanolamine salt, and mefluidide potassium salt are collectively referred to as mefluidide. Mefluidide was first registered in October 1984, mefluidide diethanolamine salt was first registered in March 1973, and mefluidide potassium salt was first registered in December 1988. ... Based on the structural similarities of mefluidide (114001) and its diethanolamine (DEA) (114002) and potassium salts (114003), and the physical and chemical properties of the DEA and potassium salts, EPA has concluded that mefluidide DEA and potassium salts are biologically equivalent to mefluidide and thus they share the same toxicity as free mefluidide. |
| Category | Organic Chemicals |
Documented applications: Uses: Used as an anilide post-emergence plant growth regulator to suppress seed heads and fruiting and to slow plant growth to reduce maintenance, Registered for non-crop land (i.e. industrial, roadside, and public areas) and residential turf, Multiple products also contain additional plant growth regulators or herbicides (i.e. Paclobutrazol and Imazapyr), [Reference #1] Used as intermediate, [3M MSDS], No registered food, feed uses and no food tolerances in the US, [Reference #1], Using Disinfectants or Biocides [Category: Clean], Farming (Pesticides) [Category: Industry], For mefluidide diethanolamine salt (USEPA, OPP Pesticide Code: 114002) ACTIVE products with label matches., SRP: Registered for use in the USA but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses., Mefluidide is a plant growth regulator that is applied postemergence when needed, and is a member of the anilide class of compounds. It is used to suppress seed heads and fruiting, as well as retarding growth to reduce mowing and trimming. It is also registered for growth control of low maintenance turf on rights-of-ways, airports, public and industrial sites. Mefluidide products can also be used on residential lawns. There are no registered food, feed uses, and no food tolerances exist for mefluidide., Formulations, Preparations: Embark 2-S Plant Growth Regulator (PBI, Gordon Corporation): Active ingredient: mefluidide, diethanolamine salt 28.0%., Mefluidide 2-S Concentrate (PBI, Embark E-Z-TU-Use Plant Growth Regulator (PBI, diethanolamine salt 3.2%., EH 1135 PGR (PBI, diethanolamine salt 21.45%, imazapyr 0.15%, and imazethapyr, ammonium salt 4.09%., U.S. Production: Non-confidential 2016 Chemical Data Reporting (CDR) information on the production and use of chemicals manufactured or imported into the United States. Chemical: Mefluidine diethanolamine:, Table: National Aggregate Production Volume (pounds) [Table#8499], General Manufacturing Information: Mefluidide, mefluidide diethanolamine salt, and mefluidide potassium salt are collectively referred to as mefluidide. Mefluidide was first registered in October 1984, mefluidide diethanolamine salt was first registered in March 1973, and mefluidide potassium salt was first registered in December 1988. ... Based on the structural similarities of mefluidide (114001) and its diethanolamine (DEA) (114002) and potassium salts (114003), and the physical and chemical properties of the DEA and potassium salts, EPA has concluded that mefluidide DEA and potassium salts are biologically equivalent to mefluidide and thus they share the same toxicity as free mefluidide..
N-[2,4-dimethyl-5-(trifluoromethylsulfonylamino)phenyl]acetamide: 2-(2 -hydroxyethylamino)ethanol is a carbon-based organic compound with CAS registry number 53780-36-2 and molecular formula C15H24F3N3O5S (molecular weight 415.4), belonging to the organic chemicals segment of chemical raw materials.
CAS number: 53780-36-2
Its molecular formula C15H24F3N3O5S comprises 15 C, 24 H, 3 F, 3 N, 5 O, 1 S atoms.
Also known as: N-[2,4-dimethyl-5-(trifluoromethylsulfonylamino)phenyl]acetamide: 2-(2 -hydroxyethylamino)ethanol · N-[2,4-二甲基-5-(三氟甲基磺酰氨基)苯基]乙酰胺：2-(2-羟乙基氨基)乙醇
Category: organic chemicals
The CAS registry number of N-[2,4-dimethyl-5-(trifluoromethylsulfonylamino)phenyl]acetamide: 2-(2 -hydroxyethylamino)ethanol is 53780-36-2.
Molecular formula C15H24F3N3O5S, molecular weight 415.4.
It is also registered under: N-[2,4-dimethyl-5-(trifluoromethylsulfonylamino)phenyl]acetamide: 2-(2 -hydroxyethylamino)ethanol, N-[2,4-二甲基-5-(三氟甲基磺酰氨基)苯基]乙酰胺：2-(2-羟乙基氨基)乙醇.
Recorded applications: Uses: Used as an anilide post-emergence plant growth regulator to suppress seed heads and fruiting and to slow plant growth to reduce maintenance, Registered for non-crop land (i.e. industrial, roadside, and public areas) and residential turf, Multiple products also contain additional plant growth regulators or herbicides (i.e. Paclobutrazol and Imazapyr), [Reference #1] Used as intermediate, [3M MSDS], No registered food, feed uses and no food tolerances in the US, [Reference #1], Using Disinfectants or Biocides [Category: Clean], Farming (Pesticides) [Category: Industry], For mefluidide diethanolamine salt (USEPA, OPP Pesticide Code: 114002) ACTIVE products with label matches., SRP: Registered for use in the USA but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses., Mefluidide is a plant growth regulator that is applied postemergence when needed, and is a member of the anilide class of compounds. It is used to suppress seed heads and fruiting, as well as retarding growth to reduce mowing and trimming. It is also registered for growth control of low maintenance turf on rights-of-ways, airports, public and industrial sites. Mefluidide products can also be used on residential lawns. There are no registered food, feed uses, and no food tolerances exist for mefluidide., Formulations, Preparations: Embark 2-S Plant Growth Regulator (PBI, Gordon Corporation): Active ingredient: mefluidide, diethanolamine salt 28.0%., Mefluidide 2-S Concentrate (PBI, Embark E-Z-TU-Use Plant Growth Regulator (PBI, diethanolamine salt 3.2%., EH 1135 PGR (PBI, diethanolamine salt 21.45%, imazapyr 0.15%, and imazethapyr, ammonium salt 4.09%., U.S. Production: Non-confidential 2016 Chemical Data Reporting (CDR) information on the production and use of chemicals manufactured or imported into the United States. Chemical: Mefluidine diethanolamine:, Table: National Aggregate Production Volume (pounds) [Table#8499], General Manufacturing Information: Mefluidide, mefluidide diethanolamine salt, and mefluidide potassium salt are collectively referred to as mefluidide. Mefluidide was first registered in October 1984, mefluidide diethanolamine salt was first registered in March 1973, and mefluidide potassium salt was first registered in December 1988. ... Based on the structural similarities of mefluidide (114001) and its diethanolamine (DEA) (114002) and potassium salts (114003), and the physical and chemical properties of the DEA and potassium salts, EPA has concluded that mefluidide DEA and potassium salts are biologically equivalent to mefluidide and thus they share the same toxicity as free mefluidide..
Category: Organic Chemicals.
Independent reference data for N-[2,4-dimethyl-5-(trifluoromethylsulfonylamino)phenyl]acetamide: 2-(2 -hydroxyethylamino)ethanol (CAS 53780-36-2), compiled from public chemistry databases.
| CAS 号 | 53780-36-2 |
|---|---|
| PubChem CID | 62067 |
| 分子式 | C15H24F3N3O5S |
| IUPAC 名称 | N-[2,4-dimethyl-5-(trifluoromethylsulfonylamino)phenyl]acetamide;2-(2-hydroxyethylamino)ethanol |
| UNII（FDA） | 367H5E6MS0 |
| Molecular Weight | 415.4 |
|---|---|
| Hydrogen Bond Donor Count | 5 |
| Hydrogen Bond Acceptor Count | 10 |
| Rotatable Bond Count | 7 |
| Exact Mass | 415.13887653 |
| Monoisotopic Mass | 415.13887653 |
| Topological Polar Surface Area | 136 |
| Heavy Atom Count | 27 |
| Melting Point | 106-108 °C |
|---|---|
| Solubility | In water, 556 mg/g at 25 °C |
| Density | 0.69 g/cu cm at 25 °C |
| Vapor Pressure | <1.0X10-7 mm Hg at 25 °C |
| LogP | Kow = 3.2X10-2 at 25 °C. |
Mefluidide-diolamine; Diethanolamine mefluidide; Mefluidide-diolamine [ISO]; Embark (2-S); Caswell No. 333AA; Mefluidide diethanolamine salt; Methafluoridamid diethanolamine; EPA Pesticide Chemical Code 114002; UNII-367H5E6MS0; 367H5E6MS0; MEFLUIDIDE DIOLAMINE SALT; DTXSID3034298; HSDB 8431; N-(2,4-Dimethyl-5-(((trifluoromethyl)-sulfonyl)amino)phenyl)acetamide, diethanolamine salt; Mefluidide DEA; Embark (2S)
N-[2,4-二甲基-5-(三氟甲基磺酰氨基)苯基]乙酰胺：2-(2-羟乙基氨基)乙醇 · CAS 53780-36-2 · C15H24F3N3O5S. UNII 367H5E6MS0. Melting Point: 106-108 °C; Solubility: In water, 556 mg/g at 25 °C; Density: 0.69 g/cu cm at 25 °C.
Source: PubChem / Wikidata; the batch COA governs where values differ.
Supplier: Jinan Shenghe Chemical Co., Ltd.