Anisyl alcohol (CAS 105-13-5) — formula C8H10O2, molecular weight 138.07 g/mol.
| CAS Number | 105-13-5 |
|---|---|
| Molecular Formula | C8H10O2 |
| Molecular Weight | 138.07 g/mol |
| Melting Point | 24 - 25 °C |
| Boiling Point | 259.00 to 260.00 °C. @ 760.00 mm Hg |
| LogP | 1.10 |
| Applications | Uses: Used as a flavoring agent, [FDA] Used to make perfumes, fragrances, pharmaceuticals, photo-chemicals, cosmetics, and personal care products, [ECHA REACH Registrations], Use Classification: Fragrance Ingredients, Flavoring Agents -> JECFA Flavorings Index, Flavouring Agent -> FLAVOURING_AGENT -> JECFA Functional Classes, Industry Uses: Not Known or Reasonably Ascertainable, Consumer Uses: Not Known or Reasonably Ascertainable, Household Products: Cosmetics product ingredient: 4-Methoxybenzyl alcohol (ANISE ALCOHOL), Anise alcohol is a fragrance allergen. Fragrance allergens are hazardous only to individuals who suffer from fragrance allergies. The Cosmetic Fragrance and Flavor Ingredient Right to Know Act of 2020 requires fragrance allergens included in Annex III of the EU Cosmetics Regulation No. 1223, 2009 be reported to the California Department of Public Health. Fragrance allergens are only required to be reported if present in a rinse-off cosmetic product at a concentration at or above 0.01 percent (100 parts per million) or in a leave-on cosmetic product at a concentration at or above 0.001 percent (10 parts per million)., For more information, you can visit the fragrance allergens webpage on the California Safe Cosmetics Program website:, https:, www.cdph.ca.gov, Programs, CCDPHP, DEODC, OHB, CSCP, Pages, FragranceAllergens.aspx, Product count: 1313, Information on 44 consumer products that contain Anisyl alcohol in the following categories is provided:, • Auto Products, • Commercial, Institutional, • Inside the Home, • Personal Care, Information on 1 consumer products that contain Anisyl alcohol in the following categories is provided:, IFRA Fragrance Standards: Anisyl alcohol, Anisalcohol, Anise alcohol, Anisic alcohol, Benzyl alcohol, p-methoxy, p-Methoxybenzyl alcohol, IFRA_STD_006.pdf, 49, IFRA 51st Amendment - Guidance for the use of IFRA Standards, Restriction: This material should be used only in the limited quantity as stated in the Standard, DERMAL SENSITIZATION AND SYSTEMIC TOXICITY, Due to the possible ingestion of small amounts of fragrance ingredients from their use in products in Categories 1 and 6, materials must not only comply with IFRA Standards but must also be recognized as safe as a flavoring ingredient as defined by the IOFI Code of Practice (www.iofi.org). For more details see chapter 1 of the Guidance for the use of IFRA Standards., Restriction Limits in the Finished Product (%): 0.0028 [Products applied to the lips], 0.039 [Products applied to the axillae], 0.025 [Products applied to the face, body using fingertips], 0.21 [Products related to fine fragrances], 0.041 [Products applied to the body using the hands (palms), primarily leave-on (Body lotion)], 0.0055 [Products applied to the face using the hands (palms), primarily leave-on (Face moisturizer)], 0.033 [Products applied to the hands using the hands (palms), primarily leave-on (Hand cream)], 0.002 [Products applied to babies using the hands (palms), primarily leave-on (Baby cream, oil, talc)], 0.091 [Products with oral and lip exposure], 0.033 [Rinse-off products applied to the hair with some hand contact], 0.033 [Leave-on products applied to the hair with some hand contact], 0.002 [Products with significant anogenital exposure (tampon)], 0.099 [Products with body and hand exposure, primarily rinse off], 0.099 [Household care products with mostly hand contact (excluding aerosol, spray products)], 0.17 [Household care products with mostly hand contact (household aerosol, 0.002 [Products with intended skin contact but minimal transfer of fragrance to skin from inert substrate without UV exposure], 0.002 [Products with intended skin contact but minimal transfer of fragrance to skin from inert substrate with potential UV exposure], 14 [Other air care products not intended for direct skin contact, minimal or insignificant transfer to skin], U.S. Production: 2023: 14, 881 lb, 2022: 4, 960 lb, 2021: 3, 968 lb, 2020: 67, 956 lb, General Manufacturing Information: All Other Basic Organic Chemical Manufacturing, Benzenemethanol, 4-methoxy-: ACTIVE |
Documented applications: Uses: Used as a flavoring agent, [FDA] Used to make perfumes, fragrances, pharmaceuticals, photo-chemicals, cosmetics, and personal care products, [ECHA REACH Registrations], Use Classification: Fragrance Ingredients, Flavoring Agents -> JECFA Flavorings Index, Flavouring Agent -> FLAVOURING_AGENT -> JECFA Functional Classes, Industry Uses: Not Known or Reasonably Ascertainable, Consumer Uses: Not Known or Reasonably Ascertainable, Household Products: Cosmetics product ingredient: 4-Methoxybenzyl alcohol (ANISE ALCOHOL), Anise alcohol is a fragrance allergen. Fragrance allergens are hazardous only to individuals who suffer from fragrance allergies. The Cosmetic Fragrance and Flavor Ingredient Right to Know Act of 2020 requires fragrance allergens included in Annex III of the EU Cosmetics Regulation No. 1223, 2009 be reported to the California Department of Public Health. Fragrance allergens are only required to be reported if present in a rinse-off cosmetic product at a concentration at or above 0.01 percent (100 parts per million) or in a leave-on cosmetic product at a concentration at or above 0.001 percent (10 parts per million)., For more information, you can visit the fragrance allergens webpage on the California Safe Cosmetics Program website:, https:, www.cdph.ca.gov, Programs, CCDPHP, DEODC, OHB, CSCP, Pages, FragranceAllergens.aspx, Product count: 1313, Information on 44 consumer products that contain Anisyl alcohol in the following categories is provided:, • Auto Products, • Commercial, Institutional, • Inside the Home, • Personal Care, Information on 1 consumer products that contain Anisyl alcohol in the following categories is provided:, IFRA Fragrance Standards: Anisyl alcohol, Anisalcohol, Anise alcohol, Anisic alcohol, Benzyl alcohol, p-methoxy, p-Methoxybenzyl alcohol, IFRA_STD_006.pdf, 49, IFRA 51st Amendment - Guidance for the use of IFRA Standards, Restriction: This material should be used only in the limited quantity as stated in the Standard, DERMAL SENSITIZATION AND SYSTEMIC TOXICITY, Due to the possible ingestion of small amounts of fragrance ingredients from their use in products in Categories 1 and 6, materials must not only comply with IFRA Standards but must also be recognized as safe as a flavoring ingredient as defined by the IOFI Code of Practice (www.iofi.org). For more details see chapter 1 of the Guidance for the use of IFRA Standards., Restriction Limits in the Finished Product (%): 0.0028 [Products applied to the lips], 0.039 [Products applied to the axillae], 0.025 [Products applied to the face, body using fingertips], 0.21 [Products related to fine fragrances], 0.041 [Products applied to the body using the hands (palms), primarily leave-on (Body lotion)], 0.0055 [Products applied to the face using the hands (palms), primarily leave-on (Face moisturizer)], 0.033 [Products applied to the hands using the hands (palms), primarily leave-on (Hand cream)], 0.002 [Products applied to babies using the hands (palms), primarily leave-on (Baby cream, oil, talc)], 0.091 [Products with oral and lip exposure], 0.033 [Rinse-off products applied to the hair with some hand contact], 0.033 [Leave-on products applied to the hair with some hand contact], 0.002 [Products with significant anogenital exposure (tampon)], 0.099 [Products with body and hand exposure, primarily rinse off], 0.099 [Household care products with mostly hand contact (excluding aerosol, spray products)], 0.17 [Household care products with mostly hand contact (household aerosol, 0.002 [Products with intended skin contact but minimal transfer of fragrance to skin from inert substrate without UV exposure], 0.002 [Products with intended skin contact but minimal transfer of fragrance to skin from inert substrate with potential UV exposure], 14 [Other air care products not intended for direct skin contact, minimal or insignificant transfer to skin], U.S. Production: 2023: 14, 881 lb, 2022: 4, 960 lb, 2021: 3, 968 lb, 2020: 67, 956 lb, General Manufacturing Information: All Other Basic Organic Chemical Manufacturing, Benzenemethanol, 4-methoxy-: ACTIVE.
Anisyl alcohol is a chemical compound with CAS registry number 105-13-5 and molecular formula C8H10O2 (molecular weight 138.07 g/mol).
CAS number: 105-13-5
Its molecular formula C8H10O2 comprises 8 C, 10 H, 2 O atoms.
Also known as: Anisyl alcohol · P-METHOXYBENZYL ALCOHOL · 4-Methoxybenzyl alcohol
The CAS registry number of Anisyl alcohol is 105-13-5.
Molecular formula C8H10O2, molecular weight 138.07 g/mol.
It is also registered under: Anisyl alcohol, P-METHOXYBENZYL ALCOHOL, 4-Methoxybenzyl alcohol.
Recorded applications: Uses: Used as a flavoring agent, [FDA] Used to make perfumes, fragrances, pharmaceuticals, photo-chemicals, cosmetics, and personal care products, [ECHA REACH Registrations], Use Classification: Fragrance Ingredients, Flavoring Agents -> JECFA Flavorings Index, Flavouring Agent -> FLAVOURING_AGENT -> JECFA Functional Classes, Industry Uses: Not Known or Reasonably Ascertainable, Consumer Uses: Not Known or Reasonably Ascertainable, Household Products: Cosmetics product ingredient: 4-Methoxybenzyl alcohol (ANISE ALCOHOL), Anise alcohol is a fragrance allergen. Fragrance allergens are hazardous only to individuals who suffer from fragrance allergies. The Cosmetic Fragrance and Flavor Ingredient Right to Know Act of 2020 requires fragrance allergens included in Annex III of the EU Cosmetics Regulation No. 1223, 2009 be reported to the California Department of Public Health. Fragrance allergens are only required to be reported if present in a rinse-off cosmetic product at a concentration at or above 0.01 percent (100 parts per million) or in a leave-on cosmetic product at a concentration at or above 0.001 percent (10 parts per million)., For more information, you can visit the fragrance allergens webpage on the California Safe Cosmetics Program website:, https:, www.cdph.ca.gov, Programs, CCDPHP, DEODC, OHB, CSCP, Pages, FragranceAllergens.aspx, Product count: 1313, Information on 44 consumer products that contain Anisyl alcohol in the following categories is provided:, • Auto Products, • Commercial, Institutional, • Inside the Home, • Personal Care, Information on 1 consumer products that contain Anisyl alcohol in the following categories is provided:, IFRA Fragrance Standards: Anisyl alcohol, Anisalcohol, Anise alcohol, Anisic alcohol, Benzyl alcohol, p-methoxy, p-Methoxybenzyl alcohol, IFRA_STD_006.pdf, 49, IFRA 51st Amendment - Guidance for the use of IFRA Standards, Restriction: This material should be used only in the limited quantity as stated in the Standard, DERMAL SENSITIZATION AND SYSTEMIC TOXICITY, Due to the possible ingestion of small amounts of fragrance ingredients from their use in products in Categories 1 and 6, materials must not only comply with IFRA Standards but must also be recognized as safe as a flavoring ingredient as defined by the IOFI Code of Practice (www.iofi.org). For more details see chapter 1 of the Guidance for the use of IFRA Standards., Restriction Limits in the Finished Product (%): 0.0028 [Products applied to the lips], 0.039 [Products applied to the axillae], 0.025 [Products applied to the face, body using fingertips], 0.21 [Products related to fine fragrances], 0.041 [Products applied to the body using the hands (palms), primarily leave-on (Body lotion)], 0.0055 [Products applied to the face using the hands (palms), primarily leave-on (Face moisturizer)], 0.033 [Products applied to the hands using the hands (palms), primarily leave-on (Hand cream)], 0.002 [Products applied to babies using the hands (palms), primarily leave-on (Baby cream, oil, talc)], 0.091 [Products with oral and lip exposure], 0.033 [Rinse-off products applied to the hair with some hand contact], 0.033 [Leave-on products applied to the hair with some hand contact], 0.002 [Products with significant anogenital exposure (tampon)], 0.099 [Products with body and hand exposure, primarily rinse off], 0.099 [Household care products with mostly hand contact (excluding aerosol, spray products)], 0.17 [Household care products with mostly hand contact (household aerosol, 0.002 [Products with intended skin contact but minimal transfer of fragrance to skin from inert substrate without UV exposure], 0.002 [Products with intended skin contact but minimal transfer of fragrance to skin from inert substrate with potential UV exposure], 14 [Other air care products not intended for direct skin contact, minimal or insignificant transfer to skin], U.S. Production: 2023: 14, 881 lb, 2022: 4, 960 lb, 2021: 3, 968 lb, 2020: 67, 956 lb, General Manufacturing Information: All Other Basic Organic Chemical Manufacturing, Benzenemethanol, 4-methoxy-: ACTIVE.
Independent reference data for Anisyl alcohol (CAS 105-13-5), compiled from public chemistry databases.
| CAS 号 | 105-13-5 |
|---|---|
| PubChem CID | 7738 |
| 分子式 | C8H10O2 |
| 分子量 | 138.07 g/mol |
| IUPAC 名称 | (4-methoxyphenyl)methanol |
| InChIKey | MSHFRERJPWKJFX-UHFFFAOYSA-N |
| UNII（FDA） | 7N6XGV3U49 |
| ChEBI 编号 | CHEBI:193647 |
| FEMA 编号 | 2099 |
| JECFA 编号 | 871 |
| Molecular Weight | 138.16 |
|---|---|
| XLogP3 | 1.1 |
| Hydrogen Bond Donor Count | 1 |
| Hydrogen Bond Acceptor Count | 2 |
| Rotatable Bond Count | 2 |
| Exact Mass | 138.068079557 |
| Monoisotopic Mass | 138.068079557 |
| Topological Polar Surface Area | 29.5 |
| Heavy Atom Count | 10 |
| Boiling Point | 259.00 to 260.00 °C. @ 760.00 mm Hg |
|---|---|
| Boiling Point | 259 °C |
| Boiling Point | 259.1 °C @760 [mm Hg] |
| Melting Point | 24 - 25 °C |
| Melting Point | 25 °C |
| Solubility | 2 mg/mL at 20 °C |
| Density | 1.107-1.115 |
| Density | 1.108 @25 °C |
| Vapor Pressure | 0.0038 [mmHg] |
| LogP | 1.10 |
4-METHOXYBENZYL ALCOHOL; 105-13-5; (4-Methoxyphenyl)methanol; Anise alcohol; Anisyl alcohol; p-Methoxybenzyl alcohol; Benzenemethanol, 4-methoxy-; 4-Methoxybenzenemethanol; Benzyl alcohol, p-methoxy-; FEMA No. 2099; DTXSID6044357; 7N6XGV3U49; NSC-2151; para-methoxybenzyl alcohol; DTXCID4024357; RefChem:558133
| 法规与食品接触 | EU Flavoring substances FDA Substance added to food: FLAVORING AGENT OR ADJUVANT Flavoring Agents FLAVOURING_AGENT: Flavouring Agent Flower, Herb No safety concern at current levels of intake when used as a flavouring agent |
|---|
| 已通报的危害声明 | H302 (97.3%), H317 (95.5%), H318 (91.5%), H319 |
|---|
大茴香醇 的 CAS 号为 105-13-5，分子式 C8H10O2，分子量 138.07 g/mol。 UNII 7N6XGV3U49; ChEBI 193647; InChIKey MSHFRERJPWKJFX-UHFFFAOYSA-N. Boiling Point: 259.00 to 260.00 °C. @ 760.00 mm Hg; Boiling Point: 259 °C; Boiling Point: 259.1 °C @760 [mm Hg].
Source: PubChem / Wikidata; the batch COA governs where values differ.
Supplier: Jinan Shenghe Chemical Co., Ltd.
中文页面: Anisyl alcohol