Isodehydroacetic acid (CAS 480-65-9): Sourcing & QC Notes from a Organic Chemicals Perspective
Isodehydroacetic acid (CAS 480-65-9; InChIKey QOADIMYPCZMZSG-UHFFFAOYSA-N) is a chemical raw material used in Industrial Chemicals, with formula C8H8O4 and molecular weight 168.15 g/mol. This page lists database-verifiable properties, what those values imply for formulation and QC, and a specification checklist for Industrial Chemicals applications.
Key takeaways
- XLogP = 0.3 sits in an intermediate range: solubility cannot be assumed from experience. Run a bench test at the target pH and temperature and specify measured solubility as the acceptance criterion.
- TPSA 64 Ų and 1 H-bond donors / 4 acceptors mean hydrogen bonding with alcohol-, water- or amide-containing systems warrants a viscosity and clarity check after blending.
- Molecular weight 168.15 g/mol: 1 mol = 168.15 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 168.04225873 supports HRMS identification (add a proton for [M+H]+).
- InChIKey QOADIMYPCZMZSG-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.
Published properties of Isodehydroacetic acid (by CAS 480-65-9)
| Property | Value |
|---|---|
| Molecular formula | C8H8O4 |
| Molecular weight | 168.15 g/mol |
| Accurate mass | 168.04225873 |
| IUPAC name | 2,4-dimethyl-6-oxopyran-3-carboxylic acid |
| InChIKey | QOADIMYPCZMZSG-UHFFFAOYSA-N |
| XLogP | 0.3 |
| Topological polar surface area | 63.6 Ų |
| H-bond donors / acceptors | 1 / 4 |
| Rotatable bonds | 1 |
| Heavy atoms | 12 |
Computed values above: PubChem CID 95775; melting/boiling points, where shown, come from the site product page.
What the numbers mean in practice
| Aspect | Evidence and actionable conclusion |
|---|---|
| Solubility & compatibility | XLogP = 0.3 sits in an intermediate range: solubility cannot be assumed from experience. Run a bench test at the target pH and temperature and specify measured solubility as the acceptance criterion. |
| Molecular polarity | TPSA 64 Ų and 1 H-bond donors / 4 acceptors mean hydrogen bonding with alcohol-, water- or amide-containing systems warrants a viscosity and clarity check after blending. |
| Dosing & analytical checks | Molecular weight 168.15 g/mol: 1 mol = 168.15 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 168.04225873 supports HRMS identification (add a proton for [M+H]+). |
| Substance identity | InChIKey QOADIMYPCZMZSG-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups. |
| Crystallisation & incoming QC | 1 rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay. |
Specification checklist for Industrial Chemicals use
| Check | Why it matters | How to verify |
|---|---|---|
| Batch baseline (CAS 480-65-9) | Product-specific values to check line by line against the COA and specification; salts and hydrates differ | 分子量 168.15 g/mol; XLogP 0.3; TPSA 64 Ų; InChIKey QOADIMYPCZMZSG-UHFFFAOYSA-N |
| Specification & method | Assay basis can differ for the same name | State indices, test method and acceptance rules in the contract |
| Impurities & lot consistency | Trace impurities often explain performance differences | Request impurity profiles and recent COAs; compare key indices |
| Identity check | Same-name, salt-form and hydrate confusion causes dosing errors | Cross-check CAS and InChIKey; confirm by spectroscopy where needed |
| Packaging, storage & retest | Transit conditions change the state on arrival | Check SDS storage and retest date; retain and retest on arrival |
Frequently asked questions
What are the formula, molecular weight and identifiers of Isodehydroacetic acid (CAS 480-65-9)?
Formula C8H8O4, molecular weight 168.15 g/mol; accurate mass 168.04225873. CAS 480-65-9 resolves the substance across PubChem and ChemSpider; InChIKey QOADIMYPCZMZSG-UHFFFAOYSA-N distinguishes same-name substances, salts and hydrates. Use the molecular weight for stoichiometric conversion; purity and grade follow the batch COA.
Is Isodehydroacetic acid suitable for Industrial Chemicals applications, and what should be checked first?
Three checks: (1) the regulatory grade and production licence for the intended use; (2) impurity and safety indices plus test methods on the batch COA; (3) identity via CAS and substance identifiers to rule out hydrate/anhydrous or salt/free-form mix-ups. With XLogP 0.3 and TPSA 64 Ų, validate aqueous versus oil-phase dispersion by a bench test before fixing the addition method.
How is the dosage of Isodehydroacetic acid calculated from molecular weight?
At 168.15 g/mol, 1 mol = 168.15 g. Blending, substitution and neutralisation should be calculated on molar equivalence, not by substituting mass parts of a related material. For hydrates or salts, adjust for active content and water of crystallisation from the COA.
What incoming-QC tests apply to Isodehydroacetic acid on arrival?
At minimum: match the COA lot to the goods; retest assay and loss on drying / water; confirm identity via InChIKey QOADIMYPCZMZSG-UHFFFAOYSA-N or spectroscopy; retain a sample with opening conditions logged. Caking, colour shift or a broad melting range should trigger polymorph and residual-solvent checks.
Related materials
- 1 0 dodecyl rac glycerol(CAS 1561-07-5):CAS 1561-07-5: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
- 1 1 1 1 2 2 tetrafluoroethylene bis oxy bis 1 2 2 trifluoroe(CAS 1998-53-4):CAS 1998-53-4: a separate CAS entry; compare impurity limits and packaging conditions for Industrial Chemicals use
- 1 1 1 1 2 2 tetrafluoro 1 2 ethanediyl bis 2 2 3 3 tetrafluo(CAS 35207-94-4):CAS 35207-94-4: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing
- 1 1 1 1 2 2 tetrafluoro 1 2 ethanediyl bis 2 chloro 2 3 3 tr(CAS 35208-02-7):CAS 35208-02-7: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
- 0 0 0 tris 4 isocyanatophenyl thiophosphate(CAS 4151-51-3):CAS 4151-51-3: a separate CAS entry; compare impurity limits and packaging conditions for Industrial Chemicals use
- 1 1 1 1 2 3 propanetriyltris oxy trisoctadecane(CAS 6076-42-2):CAS 6076-42-2: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing
For side-by-side comparison see site search for Isodehydroacetic acid, or browse the Organic Chemicals directory.
Supply & compliance
Jinan Shenghe Chemical Co., Ltd. supplies industrial and fine chemicals. When enquiring, state the product name, CAS, target grade and packaging; COA, SDS and technical data sheets are available with the shipment. Contact: info@chemsp.cn | +86-18553102138. This page is technical information for industrial raw materials; regulated food, feed, cosmetic or pharmaceutical uses require the corresponding grade and compliance with local rules.
Data sources
Source: PubChem computed properties, CID 95775 (https://pubchem.ncbi.nlm.nih.gov/compound/95775), accessed 2026-11-09; melting/boiling points, where shown, come from the site product page. Hydrates and salts carry different values — verify by CAS and InChIKey.
Related Products
- 1 0 dodecyl rac glycerol (CAS 1561-07-5)
- 1 1 1 1 2 2 tetrafluoroethylene bis oxy bis 1 2 2 trifluoroe (CAS 1998-53-4)
- 1 1 1 1 2 2 tetrafluoro 1 2 ethanediyl bis 2 2 3 3 tetrafluo (CAS 35207-94-4)
- 1 1 1 1 2 2 tetrafluoro 1 2 ethanediyl bis 2 chloro 2 3 3 tr (CAS 35208-02-7)
- 0 0 0 tris 4 isocyanatophenyl thiophosphate (CAS 4151-51-3)
- 1 1 1 1 2 3 propanetriyltris oxy trisoctadecane (CAS 6076-42-2)