Funoran (CAS 9083-24-3): Properties, Molar Dosing and a Sourcing Checklist
Funoran (CAS 9083-24-3; InChIKey VEXZGXHMUGYJMC-UHFFFAOYSA-N) is a chemical raw material used in Industrial Chemicals, with formula ClH and molecular weight 36.46 g/mol. This page lists database-verifiable properties, what those values imply for formulation and QC, and a specification checklist for Industrial Chemicals applications.
Key takeaways
- XLogP = 0.8 sits in an intermediate range: solubility cannot be assumed from experience. Run a bench test at the target pH and temperature and specify measured solubility as the acceptance criterion.
- TPSA Ų and 1 H-bond donors / acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils.
- Molecular weight 36.46 g/mol: 1 mol = 36.46 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 35.9766777 supports HRMS identification (add a proton for [M+H]+).
- InChIKey VEXZGXHMUGYJMC-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.
Published properties of Funoran (by CAS 9083-24-3)
| Property | Value |
|---|---|
| Molecular formula | ClH |
| Molecular weight | 36.46 g/mol |
| Accurate mass | 35.9766777 |
| IUPAC name | chlorane |
| InChIKey | VEXZGXHMUGYJMC-UHFFFAOYSA-N |
| XLogP | 0.8 |
| Topological polar surface area | 0 Ų |
| H-bond donors / acceptors | 1 / 0 |
| Rotatable bonds | 0 |
| Heavy atoms | 1 |
Computed values above: PubChem CID 313; melting/boiling points, where shown, come from the site product page.
What the numbers mean in practice
| Aspect | Evidence and actionable conclusion |
|---|---|
| Solubility & compatibility | XLogP = 0.8 sits in an intermediate range: solubility cannot be assumed from experience. Run a bench test at the target pH and temperature and specify measured solubility as the acceptance criterion. |
| Molecular polarity | TPSA Ų and 1 H-bond donors / acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils. |
| Dosing & analytical checks | Molecular weight 36.46 g/mol: 1 mol = 36.46 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 35.9766777 supports HRMS identification (add a proton for [M+H]+). |
| Substance identity | InChIKey VEXZGXHMUGYJMC-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups. |
| Crystallisation & incoming QC | rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay. |
Specification checklist for Industrial Chemicals use
| Check | Why it matters | How to verify |
|---|---|---|
| Batch baseline (CAS 9083-24-3) | Product-specific values to check line by line against the COA and specification; salts and hydrates differ | 分子量 36.46 g/mol; XLogP 0.8; InChIKey VEXZGXHMUGYJMC-UHFFFAOYSA-N |
| Specification & method | Assay basis can differ for the same name | State indices, test method and acceptance rules in the contract |
| Impurities & lot consistency | Trace impurities often explain performance differences | Request impurity profiles and recent COAs; compare key indices |
| Identity check | Same-name, salt-form and hydrate confusion causes dosing errors | Cross-check CAS and InChIKey; confirm by spectroscopy where needed |
| Packaging, storage & retest | Transit conditions change the state on arrival | Check SDS storage and retest date; retain and retest on arrival |
Frequently asked questions
What are the formula, molecular weight and identifiers of Funoran (CAS 9083-24-3)?
Formula ClH, molecular weight 36.46 g/mol; accurate mass 35.9766777. CAS 9083-24-3 resolves the substance across PubChem and ChemSpider; InChIKey VEXZGXHMUGYJMC-UHFFFAOYSA-N distinguishes same-name substances, salts and hydrates. Use the molecular weight for stoichiometric conversion; purity and grade follow the batch COA.
Is Funoran suitable for Industrial Chemicals applications, and what should be checked first?
Three checks: (1) the regulatory grade and production licence for the intended use; (2) impurity and safety indices plus test methods on the batch COA; (3) identity via CAS and substance identifiers to rule out hydrate/anhydrous or salt/free-form mix-ups. With limited published property data, determine solubility and addition method by bench testing rather than inference from related materials.
How is the dosage of Funoran calculated from molecular weight?
At 36.46 g/mol, 1 mol = 36.46 g. Blending, substitution and neutralisation should be calculated on molar equivalence, not by substituting mass parts of a related material. For hydrates or salts, adjust for active content and water of crystallisation from the COA.
What incoming-QC tests apply to Funoran on arrival?
At minimum: match the COA lot to the goods; retest assay and loss on drying / water; confirm identity via InChIKey VEXZGXHMUGYJMC-UHFFFAOYSA-N or spectroscopy; retain a sample with opening conditions logged. Caking, colour shift or a broad melting range should trigger polymorph and residual-solvent checks.
Related materials
- Magnesium Glycinate(CAS 14783-68-7):CAS 14783-68-7: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
- Magnesium Citrate Nonahydrate(CAS 153531-96-5):CAS 153531-96-5: a separate CAS entry; compare impurity limits and packaging conditions for Industrial Chemicals use
- Magnesium Citrate Anhydrous(CAS 3344-18-1):CAS 3344-18-1: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing
- Magnesium Gluconate Granules(CAS 3632-91-5):CAS 3632-91-5: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
- Magnesium Gluconate(CAS 59625-89-7):CAS 59625-89-7: a separate CAS entry; compare impurity limits and packaging conditions for Industrial Chemicals use
- Magnesium Glycerophosphate(CAS 927-20-8):CAS 927-20-8: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing
For side-by-side comparison see site search for Funoran, or browse the Organic Chemicals directory.
Supply & compliance
Jinan Shenghe Chemical Co., Ltd. supplies industrial and fine chemicals. When enquiring, state the product name, CAS, target grade and packaging; COA, SDS and technical data sheets are available with the shipment. Contact: info@chemsp.cn | +86-18553102138. This page is technical information for industrial raw materials; regulated food, feed, cosmetic or pharmaceutical uses require the corresponding grade and compliance with local rules.
Data sources
Source: PubChem computed properties, CID 313 (https://pubchem.ncbi.nlm.nih.gov/compound/313), accessed 2026-11-18; melting/boiling points, where shown, come from the site product page. Hydrates and salts carry different values — verify by CAS and InChIKey.