✉ info@chemsp.cn☎ +86-18553102138 ☎ 0531-84992235
📞 WhatsApp中文
Home › Blog › Ethyl allyl disulfide (CAS 72437-63-9) sourcing notes: pract

Ethyl allyl disulfide (CAS 72437-63-9) sourcing notes: practical points for Organic Chemicals

2026-09-30 · Keyword:Ethyl allyl disulfide · CAS 72437-63-9 · Jinan Shenghe Chemical Co., Ltd. · 中文

Ethyl allyl disulfide (CAS 72437-63-9; InChIKey DJLRNCWMAKPXJF-UHFFFAOYSA-N) is a chemical raw material used in Industrial Chemicals, with formula C5H10S2 and molecular weight 134.3 g/mol. This page lists database-verifiable properties, what those values imply for formulation and QC, and a specification checklist for Industrial Chemicals applications.

Key takeaways

  • XLogP = 1.9 sits in an intermediate range: solubility cannot be assumed from experience. Run a bench test at the target pH and temperature and specify measured solubility as the acceptance criterion.
  • TPSA 51 Ų and H-bond donors / 2 acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils.
  • Molecular weight 134.3 g/mol: 1 mol = 134.3 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 134.02239267 supports HRMS identification (add a proton for [M+H]+).
  • InChIKey DJLRNCWMAKPXJF-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.

Published properties of Ethyl allyl disulfide (by CAS 72437-63-9)

PropertyValue
Molecular formulaC5H10S2
Molecular weight134.3 g/mol
Accurate mass134.02239267
IUPAC name3-(ethyldisulfanyl)prop-1-ene
InChIKeyDJLRNCWMAKPXJF-UHFFFAOYSA-N
XLogP1.9
Topological polar surface area50.6 Ų
H-bond donors / acceptors0 / 2
Rotatable bonds4
Heavy atoms7

Computed values above: PubChem CID 525468; melting/boiling points, where shown, come from the site product page.

What the numbers mean in practice

AspectEvidence and actionable conclusion
Solubility & compatibilityXLogP = 1.9 sits in an intermediate range: solubility cannot be assumed from experience. Run a bench test at the target pH and temperature and specify measured solubility as the acceptance criterion.
Molecular polarityTPSA 51 Ų and H-bond donors / 2 acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils.
Dosing & analytical checksMolecular weight 134.3 g/mol: 1 mol = 134.3 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 134.02239267 supports HRMS identification (add a proton for [M+H]+).
Substance identityInChIKey DJLRNCWMAKPXJF-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.
Crystallisation & incoming QC4 rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay.

Specification checklist for Industrial Chemicals use

CheckWhy it mattersHow to verify
Batch baseline (CAS 72437-63-9)Product-specific values to check line by line against the COA and specification; salts and hydrates differ分子量 134.3 g/mol; XLogP 1.9; TPSA 51 Ų; InChIKey DJLRNCWMAKPXJF-UHFFFAOYSA-N
Specification & methodAssay basis can differ for the same nameState indices, test method and acceptance rules in the contract
Impurities & lot consistencyTrace impurities often explain performance differencesRequest impurity profiles and recent COAs; compare key indices
Identity checkSame-name, salt-form and hydrate confusion causes dosing errorsCross-check CAS and InChIKey; confirm by spectroscopy where needed
Packaging, storage & retestTransit conditions change the state on arrivalCheck SDS storage and retest date; retain and retest on arrival

Frequently asked questions

What are the formula, molecular weight and identifiers of Ethyl allyl disulfide (CAS 72437-63-9)?

Formula C5H10S2, molecular weight 134.3 g/mol; accurate mass 134.02239267. CAS 72437-63-9 resolves the substance across PubChem and ChemSpider; InChIKey DJLRNCWMAKPXJF-UHFFFAOYSA-N distinguishes same-name substances, salts and hydrates. Use the molecular weight for stoichiometric conversion; purity and grade follow the batch COA.

Is Ethyl allyl disulfide suitable for Industrial Chemicals applications, and what should be checked first?

Three checks: (1) the regulatory grade and production licence for the intended use; (2) impurity and safety indices plus test methods on the batch COA; (3) identity via CAS and substance identifiers to rule out hydrate/anhydrous or salt/free-form mix-ups. With XLogP 1.9 and TPSA 51 Ų, validate aqueous versus oil-phase dispersion by a bench test before fixing the addition method.

How is the dosage of Ethyl allyl disulfide calculated from molecular weight?

At 134.3 g/mol, 1 mol = 134.3 g. Blending, substitution and neutralisation should be calculated on molar equivalence, not by substituting mass parts of a related material. For hydrates or salts, adjust for active content and water of crystallisation from the COA.

What incoming-QC tests apply to Ethyl allyl disulfide on arrival?

At minimum: match the COA lot to the goods; retest assay and loss on drying / water; confirm identity via InChIKey DJLRNCWMAKPXJF-UHFFFAOYSA-N or spectroscopy; retain a sample with opening conditions logged. Caking, colour shift or a broad melting range should trigger polymorph and residual-solvent checks.

Related materials

For side-by-side comparison see site search for Ethyl allyl disulfide, or browse the Organic Chemicals directory.

Supply & compliance

Jinan Shenghe Chemical Co., Ltd. supplies industrial and fine chemicals. When enquiring, state the product name, CAS, target grade and packaging; COA, SDS and technical data sheets are available with the shipment. Contact: info@chemsp.cn | +86-18553102138. This page is technical information for industrial raw materials; regulated food, feed, cosmetic or pharmaceutical uses require the corresponding grade and compliance with local rules.

Data sources

Source: PubChem computed properties, CID 525468 (https://pubchem.ncbi.nlm.nih.gov/compound/525468), accessed 2026-11-09; melting/boiling points, where shown, come from the site product page. Hydrates and salts carry different values — verify by CAS and InChIKey.

← Back to Blog

Shenghe Chemical|ChemSP
鲁ICP备19037000号-2