✉ info@591daili.com☎ +86-18553102138
📞 WhatsAppEnglish
首页 › 产品目录 › 顺-2-丁烯

顺-2-丁烯

CAS 590-18-1C4H8MW 56.11

顺-2-丁烯(CAS 590-18-1):分子式 C4H8、分子量 56.11。

产品概览

CAS号590-18-1
分子式C4H8
分子量56.11
熔点-139.3 °C /cis-2-Butene/
沸点3.73 °C at 760 mm Hg /cis-2-Butene/
LogP2.3
应用领域Uses: INT FOR BUTADIENE、HEPTENES、SEC-BUTYL ALC、BUTYLENE OXIDE、PRODN OF HIGH-DENSITY POLYETHYLENE & POLYMER GASOLINES、For cis-2-butene (USEPA、OPP Pesticide Code: 606666) there are 0 labels match.、SRP: Not registered for current use in the U.S.、but approved pesticide uses may change periodically and so federal、state and local authorities must be consulted for currently approved uses.、Solvent、cross-linking agent、polymerization of gasoline、butadiene synthesis、synthesis of C4 and C5 derivatives.、CHEM INT FOR GASOLINE ALKYLATE & POLYGAS (BUTYLENES MIXT)、REFINERY FUEL (MIXT OF BUTYLENES)、For more Uses (Complete) data for cis-2-Butene (6 total)、please visit the HSDB record page.、Industry Uses: Intermediate、Fuel、Consumer Uses: Not Known or Reasonably Ascertainable、Intermediate、Methods of Manufacturing: There are two important sources for the commercial production of butylenes: catalytic or thermal cracking、and steam cracking. In these two processes、butylenes are always produced as by-products.、Butylenes、1-Butene and isobutylene cannot be economically separated into pure components by conventional distillation because they are close boiling isomers. 2-Butene can be separated from the other two isomers by simple distillation. There are four types of separation methods available: (1) selective removal of isobutylene by polymerization and separation of 1-butene、(2) use of addition reactions with alcohol、acids、or water to selectively produce pure isobutylene and 1-butene、(3) selective extraction of isobutylene with a liquid solvent、usually an acid、and (4) physical separation of isobutylene from 1-butene by absorbents.、Disproportionation or the metathesis reaction offers an opportunity to convert surplus olefins to other desirable olefins. Phillips Petroleum and Institut Francais du Petrole have pioneered this technology for the dimerization of light olefins. The original metathesis reaction of Phillips Petroleum was intended to convert propylene to 2-butene and ethylene. The reverse reaction that converts 2-butene in the presence of excess ethylene to propylene has also been demonstrated. In this process、ethylene is first dimerized to 2-butene followed by metathesis to yield propylene. Since this is a two-stage process、2-butene can be produced from the first stage、if needed. In the dimerization step、about 95% purity of 2-butene is achieved at 90% ethylene conversion.、...、A、process has emerged that consists of catalytically hydroisomerizing 1-butene to 2-butenes. In this process、trace quantities of butadienes are also hydrogenated to yield feedstocks rich in isobutylene which can then be easily separated from 2-butenes by simple distillation.、2-Butenes、For more Methods of Manufacturing (Complete) data for 2-Butene (6 total)、There are two important sources for the commercial production of butylenes: catalytic or thermal cracking、Gases containing appreciable content of cis-butene-2、along with other butene and butane hydrocarbons、are obtained by fractional distillation of refinery gas.、CATALYTIC OR THERMAL CRACKING OF PETROLEUM FEEDSTOCK、DEHYDROGENATION OF N-BUTANE、OR DISPROPORTIONATION OF PROPYLENE FOLLOWED BY SEPARATION (EG、FRACTIONAL DISTILLATION)、Formulations、Preparations: Grades: Technical 95%、CP 99%、Research 99.8%、U.S. Production: 2023: 25、000、000 - <40、000 lb、2022: 10、000 - <25、2021: 10、000 - <50、2020: 10、(1984) 3.56X10+11 g、1-Butene and 2-Butene mixed、Non-confidential 2016 Chemical Data Reporting (CDR) information on the production and use of chemicals manufactured or imported into the United States. Chemical: 2-Butene:、Table: National Aggregate Production Volume (pounds) [Table#675]、(1982) 3X10+11 G (EST、IN MIXT OF BUTYLENES)、Non-confidential 2016 Chemical Data Reporting (CDR) information on the production and use of chemicals manufactured or imported into the United States. Chemical: cis-2-Butene:、Table: National Aggregate Production Volume (pounds) [Table#5520]、Petroleum Refineries、Petrochemical Manufacturing、2-Butene: ACTIVE、2-Butene、(2Z)-: ACTIVE、Butylenes are C4H8 mono-olefin isomers: 1-butene、cis-2-butene、trans-2-butene、and isobutylene (2-methylpropene). These isomers are usually coproduced as a mixture and are commonly referred to as the C4 fraction. These C4 fractions are usually obtained as by-products from petroleum refinery and petrochemical complexes that crack petroleum fractions and natural gas liquids. Since the C4 fractions almost always contain butanes、it is also known as the B-B stream. The linear isomers are referred to as butenes.、Butenes are unsaturated olefinic hydrocarbons、C4H8、Mr 56.1080、existing in four isomers: 1) 1-butene、2) cis-2-butene、3) trans-2-butene、and 4) 2-methylpropene (isobutene). In everyday use、the IUPAC nomenclature is less common than the use of older designations. Especially the branched-chain isomer 4 is commonly referred to as "isobutene" or "isobutylene" instead of the IUPAC name "2-methylpropene". The three linear chain isomers 1、2、and 3 are usually referred to as "n-butenes" and often occur as mixtures during chemical processing. The old name "butylenes" is still in use for butenes.、can occur in trans or cis conformation、the former is the more stable form.、and isobutylene (2-methylpropene). These isomers are us

应用领域

登记用途:Uses: INT FOR BUTADIENE、HEPTENES、SEC-BUTYL ALC、BUTYLENE OXIDE、PRODN OF HIGH-DENSITY POLYETHYLENE & POLYMER GASOLINES、For cis-2-butene (USEPA、OPP Pesticide Code: 606666) there are 0 labels match.、SRP: Not registered for current use in the U.S.、but approved pesticide uses may change periodically and so federal、state and local authorities must be consulted for currently approved uses.、Solvent、cross-linking agent、polymerization of gasoline、butadiene synthesis、synthesis of C4 and C5 derivatives.、CHEM INT FOR GASOLINE ALKYLATE & POLYGAS (BUTYLENES MIXT)、REFINERY FUEL (MIXT OF BUTYLENES)、For more Uses (Complete) data for cis-2-Butene (6 total)、please visit the HSDB record page.、Industry Uses: Intermediate、Fuel、Consumer Uses: Not Known or Reasonably Ascertainable、Intermediate、Methods of Manufacturing: There are two important sources for the commercial production of butylenes: catalytic or thermal cracking、and steam cracking. In these two processes、butylenes are always produced as by-products.、Butylenes、1-Butene and isobutylene cannot be economically separated into pure components by conventional distillation because they are close boiling isomers. 2-Butene can be separated from the other two isomers by simple distillation. There are four types of separation methods available: (1) selective removal of isobutylene by polymerization and separation of 1-butene、(2) use of addition reactions with alcohol、acids、or water to selectively produce pure isobutylene and 1-butene、(3) selective extraction of isobutylene with a liquid solvent、usually an acid、and (4) physical separation of isobutylene from 1-butene by absorbents.、Disproportionation or the metathesis reaction offers an opportunity to convert surplus olefins to other desirable olefins. Phillips Petroleum and Institut Francais du Petrole have pioneered this technology for the dimerization of light olefins. The original metathesis reaction of Phillips Petroleum was intended to convert propylene to 2-butene and ethylene. The reverse reaction that converts 2-butene in the presence of excess ethylene to propylene has also been demonstrated. In this process、ethylene is first dimerized to 2-butene followed by metathesis to yield propylene. Since this is a two-stage process、2-butene can be produced from the first stage、if needed. In the dimerization step、about 95% purity of 2-butene is achieved at 90% ethylene conversion.、...、A、process has emerged that consists of catalytically hydroisomerizing 1-butene to 2-butenes. In this process、trace quantities of butadienes are also hydrogenated to yield feedstocks rich in isobutylene which can then be easily separated from 2-butenes by simple distillation.、2-Butenes、For more Methods of Manufacturing (Complete) data for 2-Butene (6 total)、There are two important sources for the commercial production of butylenes: catalytic or thermal cracking、Gases containing appreciable content of cis-butene-2、along with other butene and butane hydrocarbons、are obtained by fractional distillation of refinery gas.、CATALYTIC OR THERMAL CRACKING OF PETROLEUM FEEDSTOCK、DEHYDROGENATION OF N-BUTANE、OR DISPROPORTIONATION OF PROPYLENE FOLLOWED BY SEPARATION (EG、FRACTIONAL DISTILLATION)、Formulations、Preparations: Grades: Technical 95%、CP 99%、Research 99.8%、U.S. Production: 2023: 25、000、000 - <40、000 lb、2022: 10、000 - <25、2021: 10、000 - <50、2020: 10、(1984) 3.56X10+11 g、1-Butene and 2-Butene mixed、Non-confidential 2016 Chemical Data Reporting (CDR) information on the production and use of chemicals manufactured or imported into the United States. Chemical: 2-Butene:、Table: National Aggregate Production Volume (pounds) [Table#675]、(1982) 3X10+11 G (EST、IN MIXT OF BUTYLENES)、Non-confidential 2016 Chemical Data Reporting (CDR) information on the production and use of chemicals manufactured or imported into the United States. Chemical: cis-2-Butene:、Table: National Aggregate Production Volume (pounds) [Table#5520]、Petroleum Refineries、Petrochemical Manufacturing、2-Butene: ACTIVE、2-Butene、(2Z)-: ACTIVE、Butylenes are C4H8 mono-olefin isomers: 1-butene、cis-2-butene、trans-2-butene、and isobutylene (2-methylpropene). These isomers are usually coproduced as a mixture and are commonly referred to as the C4 fraction. These C4 fractions are usually obtained as by-products from petroleum refinery and petrochemical complexes that crack petroleum fractions and natural gas liquids. Since the C4 fractions almost always contain butanes、it is also known as the B-B stream. The linear isomers are referred to as butenes.、Butenes are unsaturated olefinic hydrocarbons、C4H8、Mr 56.1080、existing in four isomers: 1) 1-butene、2) cis-2-butene、3) trans-2-butene、and 4) 2-methylpropene (isobutene). In everyday use、the IUPAC nomenclature is less common than the use of older designations. Especially the branched-chain isomer 4 is commonly referred to as "isobutene" or "isobutylene" instead of the IUPAC name "2-methylpropene". The three linear chain isomers 1、2、and 3 are usually referred to as "n-butenes" and often occur as mixtures during chemical processing. The old name "butylenes" is still in use for butenes.、can occur in trans or cis conformation、the former is the more stable form.、and isobutylene (2-methylpropene). These isomers are us。

技术档案

这个产品是什么

顺-2-丁烯 是一种化工化合物,登记 CAS 号为 590-18-1,分子式 C4H8(分子量 56.11)。

识别信息

登记 CAS 号:590-18-1

其分子式 C4H8 由 4 个碳、8 个氢 组成。

别名/同义词:顺-2-丁烯 · cis-2-butene

常见问题

顺-2-丁烯 的 CAS 号是多少?

顺-2-丁烯 的 CAS 登记号为 590-18-1。

顺-2-丁烯 的分子式与分子量是多少?

分子式 C4H8,分子量 56.11。

顺-2-丁烯 还有哪些别名?

别名/同义词:顺-2-丁烯、cis-2-butene。

顺-2-丁烯 的登记用途是什么?

登记用途:Uses: INT FOR BUTADIENE、HEPTENES、SEC-BUTYL ALC、BUTYLENE OXIDE、PRODN OF HIGH-DENSITY POLYETHYLENE & POLYMER GASOLINES、For cis-2-butene (USEPA、OPP Pesticide Code: 606666) there are 0 labels match.、SRP: Not registered for current use in the U.S.、but approved pesticide uses may change periodically and so federal、state and local authorities must be consulted for currently approved uses.、Solvent、cross-linking agent、polymerization of gasoline、butadiene synthesis、synthesis of C4 and C5 derivatives.、CHEM INT FOR GASOLINE ALKYLATE & POLYGAS (BUTYLENES MIXT)、REFINERY FUEL (MIXT OF BUTYLENES)、For more Uses (Complete) data for cis-2-Butene (6 total)、please visit the HSDB record page.、Industry Uses: Intermediate、Fuel、Consumer Uses: Not Known or Reasonably Ascertainable、Intermediate、Methods of Manufacturing: There are two important sources for the commercial production of butylenes: catalytic or thermal cracking、and steam cracking. In these two processes、butylenes are always produced as by-products.、Butylenes、1-Butene and isobutylene cannot be economically separated into pure components by conventional distillation because they are close boiling isomers. 2-Butene can be separated from the other two isomers by simple distillation. There are four types of separation methods available: (1) selective removal of isobutylene by polymerization and separation of 1-butene、(2) use of addition reactions with alcohol、acids、or water to selectively produce pure isobutylene and 1-butene、(3) selective extraction of isobutylene with a liquid solvent、usually an acid、and (4) physical separation of isobutylene from 1-butene by absorbents.、Disproportionation or the metathesis reaction offers an opportunity to convert surplus olefins to other desirable olefins. Phillips Petroleum and Institut Francais du Petrole have pioneered this technology for the dimerization of light olefins. The original metathesis reaction of Phillips Petroleum was intended to convert propylene to 2-butene and ethylene. The reverse reaction that converts 2-butene in the presence of excess ethylene to propylene has also been demonstrated. In this process、ethylene is first dimerized to 2-butene followed by metathesis to yield propylene. Since this is a two-stage process、2-butene can be produced from the first stage、if needed. In the dimerization step、about 95% purity of 2-butene is achieved at 90% ethylene conversion.、...、A、process has emerged that consists of catalytically hydroisomerizing 1-butene to 2-butenes. In this process、trace quantities of butadienes are also hydrogenated to yield feedstocks rich in isobutylene which can then be easily separated from 2-butenes by simple distillation.、2-Butenes、For more Methods of Manufacturing (Complete) data for 2-Butene (6 total)、There are two important sources for the commercial production of butylenes: catalytic or thermal cracking、Gases containing appreciable content of cis-butene-2、along with other butene and butane hydrocarbons、are obtained by fractional distillation of refinery gas.、CATALYTIC OR THERMAL CRACKING OF PETROLEUM FEEDSTOCK、DEHYDROGENATION OF N-BUTANE、OR DISPROPORTIONATION OF PROPYLENE FOLLOWED BY SEPARATION (EG、FRACTIONAL DISTILLATION)、Formulations、Preparations: Grades: Technical 95%、CP 99%、Research 99.8%、U.S. Production: 2023: 25、000、000 - <40、000 lb、2022: 10、000 - <25、2021: 10、000 - <50、2020: 10、(1984) 3.56X10+11 g、1-Butene and 2-Butene mixed、Non-confidential 2016 Chemical Data Reporting (CDR) information on the production and use of chemicals manufactured or imported into the United States. Chemical: 2-Butene:、Table: National Aggregate Production Volume (pounds) [Table#675]、(1982) 3X10+11 G (EST、IN MIXT OF BUTYLENES)、Non-confidential 2016 Chemical Data Reporting (CDR) information on the production and use of chemicals manufactured or imported into the United States. Chemical: cis-2-Butene:、Table: National Aggregate Production Volume (pounds) [Table#5520]、Petroleum Refineries、Petrochemical Manufacturing、2-Butene: ACTIVE、2-Butene、(2Z)-: ACTIVE、Butylenes are C4H8 mono-olefin isomers: 1-butene、cis-2-butene、trans-2-butene、and isobutylene (2-methylpropene). These isomers are usually coproduced as a mixture and are commonly referred to as the C4 fraction. These C4 fractions are usually obtained as by-products from petroleum refinery and petrochemical complexes that crack petroleum fractions and natural gas liquids. Since the C4 fractions almost always contain butanes、it is also known as the B-B stream. The linear isomers are referred to as butenes.、Butenes are unsaturated olefinic hydrocarbons、C4H8、Mr 56.1080、existing in four isomers: 1) 1-butene、2) cis-2-butene、3) trans-2-butene、and 4) 2-methylpropene (isobutene). In everyday use、the IUPAC nomenclature is less common than the use of older designations. Especially the branched-chain isomer 4 is commonly referred to as "isobutene" or "isobutylene" instead of the IUPAC name "2-methylpropene". The three linear chain isomers 1、2、and 3 are usually referred to as "n-butenes" and often occur as mixtures during chemical processing. The old name "butylenes" is still in use for butenes.、can occur in trans or cis conformation、the former is the more stable form.、and isobutylene (2-methylpropene). These isomers are us。

PubChem 公开数据

顺-2-丁烯(CAS 590-18-1)的独立参考数据,整理自公开化学数据库。

各数据库的登记标识

CAS Registry Number590-18-1
PubChem CID5287573
Molecular formulaC4H8
IUPAC name(Z)-but-2-ene
UNII (FDA)L35ORC9C05

计算分子描述符

Molecular Weight56.11
XLogP32.3
Hydrogen Bond Donor Count0
Hydrogen Bond Acceptor Count0
Rotatable Bond Count0
Exact Mass56.062600255
Monoisotopic Mass56.062600255
Topological Polar Surface Area0
Heavy Atom Count4

在册的理化数值

Boiling Point3.73 °C at 760 mm Hg /cis-2-Butene/
Boiling Point3.72 °C
Boiling Point3.7 °C
Boiling Point3.7 °C @760 [mm Hg]
Melting Point-139.3 °C /cis-2-Butene/
Melting Point-138.89 °C
Melting Point-138.7 °C
Melting Point-138.9 °C
Flash Point-11.99 °C (10.42 °F) - closed cup
SolubilityIn water, 658 mg/L at 25 °C

在册的记载用途

    INT FOR BUTADIENE, HEPTENES, SEC-BUTYL ALC, BUTYLENE OXIDE; PRODN OF HIGH-DENSITY POLYETHYLENE & POLYMER GASOLINESSolvent, cross-linking agent, polymerization of gasoline, butadiene synthesis; synthesis of C4 and C5 derivatives.

    同义词与商品名

    cis-2-Butene; (Z)-But-2-ene; cis-Butene; 590-18-1; cis-But-2-ene; beta-cis-Butylene; (2Z)-but-2-ene; cis-1,2-Dimethylethylene; High-boiling butene-2; 2-BUTENE, (Z)-; z-but-2-ene; L35ORC9C05; DTXSID0027224; CHEBI:48366; RefChem:577312; DTXCID307224

    GHS 危害分类

    Reported hazard statementsH220, H280 (80.7%), H336 (11.7%)

    H220: Extremely flammable gas [Danger Flammable gases]

    P203, P210, P222, P280, P377, P381, and P403 (click each P-code to see the statement)

    公开数据库对它的描述

    cis-2-butene · CAS 590-18-1 · C4H8. UNII L35ORC9C05. Boiling Point: 3.73 °C at 760 mm Hg /cis-2-Butene/; Boiling Point: 3.72 °C; Boiling Point: 3.7 °C.

    物理形态与操作说明

    数据来源:PubChem / Wikidata;与随货 COA 不一致时以 COA 为准。

获取报价

✉ info@591daili.com☎ +86-18553102138📞 WhatsApp邮件询价WhatsApp 询价

供应商:济南圣和化工有限公司

English page: cis-2-butene

鲁ICP备19031700号-2