Sodium Dimethyldithiocarbamate (CAS 128-04-1) — formula C3H6NNaS2, molecular weight 143.21; category inorganic chemicals.
| CAS Number | 128-04-1 |
|---|---|
| Molecular Formula | C3H6NNaS2 |
| Molecular Weight | 143.21 |
| Melting Point | 110 °C |
| Applications | Uses: Used as a disinfectant, corrosion inhibitor, coagulant, vulcanizing agent, chelating agent, fungicide, and biocide (paints, cutting oils, water treatment, leather tanning, and paper manufacturing), [HSDB], Metal Machining [Category: Heat or Machine], Pulp and Paper Processing [Category: Industry], Painting (Pigments, Binders, and Biocides) [Category: Paint], Using Disinfectants or Biocides [Category: Clean], Farming (Pesticides) [Category: Industry], Sewer and Wastewater Treatment [Category: Industry], Leather Tanning and Processing [Category: Industry], For sodium dimethyldithiocarbamate (USEPA, OPP Pesticide Code: 034804) ACTIVE products with label matches., SRP: Registered for use in the U.S. but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses., Disinfectant. Corrosion inhibitor. Coagulant. Vulcanizing agent. Chelating agent. Fungicide., Used as a vulcanization ultra-accelerator for mixes based on synthetic and natural rubbers (for example butadiene rubber) and natural and synthetic latex. A fungicide., In water treatment, the rubber industry and is a registered biocide for cutting oils and aqueous systems in industries such as leather tanning and paper manufacturing., Antimicrobial agent in paints, Industry Uses: Reducing agent, Solids separation (precipitating) agent, not otherwise specified, Consumer Uses: Solids separation (precipitating) agent, Methods of Manufacturing: SDMC is manufactured by combining dimethylamine with carbon disulfide in a solution of sodium hydroxide, forming the water-soluble dithiocarbamate salt., U.S. Production: 2023: 2, 500, 000 - <4, 000, 000 lb, 2022: 2, 2021: 2, 2020: 2, Carbamodithioic acid, dimethyl-, sodium salt is listed as a High Production Volume (HPV) chemical (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and, or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B, 51FR21438)., General Manufacturing Information: Oil and Gas Drilling, Extraction, and Support activities, Services, Other (requires additional information), Utilities, N, N-dimethyl-, sodium salt (1:1): ACTIVE, Photodegradation product of tetramethylthioram disulfide. |
| Category | Inorganic Chemicals |
Documented applications: Uses: Used as a disinfectant, corrosion inhibitor, coagulant, vulcanizing agent, chelating agent, fungicide, and biocide (paints, cutting oils, water treatment, leather tanning, and paper manufacturing), [HSDB], Metal Machining [Category: Heat or Machine], Pulp and Paper Processing [Category: Industry], Painting (Pigments, Binders, and Biocides) [Category: Paint], Using Disinfectants or Biocides [Category: Clean], Farming (Pesticides) [Category: Industry], Sewer and Wastewater Treatment [Category: Industry], Leather Tanning and Processing [Category: Industry], For sodium dimethyldithiocarbamate (USEPA, OPP Pesticide Code: 034804) ACTIVE products with label matches., SRP: Registered for use in the U.S. but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses., Disinfectant. Corrosion inhibitor. Coagulant. Vulcanizing agent. Chelating agent. Fungicide., Used as a vulcanization ultra-accelerator for mixes based on synthetic and natural rubbers (for example butadiene rubber) and natural and synthetic latex. A fungicide., In water treatment, the rubber industry and is a registered biocide for cutting oils and aqueous systems in industries such as leather tanning and paper manufacturing., Antimicrobial agent in paints, Industry Uses: Reducing agent, Solids separation (precipitating) agent, not otherwise specified, Consumer Uses: Solids separation (precipitating) agent, Methods of Manufacturing: SDMC is manufactured by combining dimethylamine with carbon disulfide in a solution of sodium hydroxide, forming the water-soluble dithiocarbamate salt., U.S. Production: 2023: 2, 500, 000 - <4, 000, 000 lb, 2022: 2, 2021: 2, 2020: 2, Carbamodithioic acid, dimethyl-, sodium salt is listed as a High Production Volume (HPV) chemical (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and, or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B, 51FR21438)., General Manufacturing Information: Oil and Gas Drilling, Extraction, and Support activities, Services, Other (requires additional information), Utilities, N, N-dimethyl-, sodium salt (1:1): ACTIVE, Photodegradation product of tetramethylthioram disulfide..
Sodium Dimethyldithiocarbamate is an inorganic compound with CAS registry number 128-04-1 and molecular formula C3H6NNaS2 (molecular weight 143.21), belonging to the inorganic chemicals segment of chemical raw materials.
CAS number: 128-04-1
Its molecular formula C3H6NNaS2 comprises 3 C, 6 H, 1 N, 1 Na, 2 S atoms.
Also known as: Sodium Dimethyldithiocarbamate · 二甲基二硫代氨基甲酸钠
Category: inorganic chemicals
The CAS registry number of Sodium Dimethyldithiocarbamate is 128-04-1.
Molecular formula C3H6NNaS2, molecular weight 143.21.
It is also registered under: Sodium Dimethyldithiocarbamate, 二甲基二硫代氨基甲酸钠.
Recorded applications: Uses: Used as a disinfectant, corrosion inhibitor, coagulant, vulcanizing agent, chelating agent, fungicide, and biocide (paints, cutting oils, water treatment, leather tanning, and paper manufacturing), [HSDB], Metal Machining [Category: Heat or Machine], Pulp and Paper Processing [Category: Industry], Painting (Pigments, Binders, and Biocides) [Category: Paint], Using Disinfectants or Biocides [Category: Clean], Farming (Pesticides) [Category: Industry], Sewer and Wastewater Treatment [Category: Industry], Leather Tanning and Processing [Category: Industry], For sodium dimethyldithiocarbamate (USEPA, OPP Pesticide Code: 034804) ACTIVE products with label matches., SRP: Registered for use in the U.S. but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses., Disinfectant. Corrosion inhibitor. Coagulant. Vulcanizing agent. Chelating agent. Fungicide., Used as a vulcanization ultra-accelerator for mixes based on synthetic and natural rubbers (for example butadiene rubber) and natural and synthetic latex. A fungicide., In water treatment, the rubber industry and is a registered biocide for cutting oils and aqueous systems in industries such as leather tanning and paper manufacturing., Antimicrobial agent in paints, Industry Uses: Reducing agent, Solids separation (precipitating) agent, not otherwise specified, Consumer Uses: Solids separation (precipitating) agent, Methods of Manufacturing: SDMC is manufactured by combining dimethylamine with carbon disulfide in a solution of sodium hydroxide, forming the water-soluble dithiocarbamate salt., U.S. Production: 2023: 2, 500, 000 - <4, 000, 000 lb, 2022: 2, 2021: 2, 2020: 2, Carbamodithioic acid, dimethyl-, sodium salt is listed as a High Production Volume (HPV) chemical (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and, or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B, 51FR21438)., General Manufacturing Information: Oil and Gas Drilling, Extraction, and Support activities, Services, Other (requires additional information), Utilities, N, N-dimethyl-, sodium salt (1:1): ACTIVE, Photodegradation product of tetramethylthioram disulfide..
Category: Inorganic Chemicals.
Independent reference data for Sodium Dimethyldithiocarbamate (CAS 128-04-1), compiled from public chemistry databases.
| CAS Registry Number | 128-04-1 |
|---|---|
| PubChem CID | 560256 |
| Molecular formula | C3H6NNaS2 |
| IUPAC name | sodium N,N-dimethylcarbamodithioate |
| UNII (FDA) | 769GO8W6QQ |
| Molecular Weight | 143.21 |
|---|---|
| Hydrogen Bond Donor Count | 0 |
| Hydrogen Bond Acceptor Count | 2 |
| Rotatable Bond Count | 0 |
| Exact Mass | 142.98393582 |
| Monoisotopic Mass | 142.98393582 |
| Topological Polar Surface Area | 36.3 |
| Heavy Atom Count | 7 |
| Melting Point | 110 °C |
|---|---|
| Density | 1.43 g/mL at 20 °C |
Sodium dimethyldithiocarbamate; 128-04-1; Sodium dimethylcarbamodithioate; Dimethyldithiocarbamic acid sodium salt; Sodium dimethyl dithiocarbamate; Sanceler S; Wing Stop B; Diaprosim AB 13; Vinditat; Vinstop; Sdmdtc; Diram; Sodam; Methyl namate; Aceto SDD 40; Nocceler S
| Regulatory & Food Contact | FDA Substance added to food: ANTIMICROBIAL AGENT FDA Inventory of Food Contact Substances Listed in 21 CFR: FCS |
|---|
| Reported hazard statements | H332 (12.2%), H400 (93.3%), H410 (60.2%), H411 (12.7%), H302, H315, H371, H373 |
|---|
H332 (12.2%): Harmful if inhaled [Warning Acute toxicity, inhalation]
H400 (93.3%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]
Sodium Dimethyldithiocarbamate · CAS 128-04-1 · C3H6NNaS2. UNII 769GO8W6QQ. Melting Point: 110 °C; Density: 1.43 g/mL at 20 °C.
Source: PubChem / Wikidata; the batch COA governs where values differ.
Supplier: Jinan Shenghe Chemical Co., Ltd.
中文页面: 二甲基二硫代氨基甲酸钠