o-Anisaldehyde

o-Anisaldehyde (CAS registry number 135-02-4) is supplied as a chemical raw material for formulation and synthesis work. The molecular formula is C8H8O2, giving a molecular weight of 136.15 g/mol. This is a aromatic compound of 8 carbon with 2 heteroatoms, built on a ring-unsaturated carbon skeleton; of low molecular weight. Documents are issued per shipment rather than per catalogue entry: each batch is accompanied by a Certificate of Analysis, and safety data sheets, technical datasheets and third-party test reports are supplied on request for export documentation.

Product Overview

Applications

Organic Chemicals

Recorded applications for this entry: Organic Chemicals. Where your formulation differs, the relevant point to check is not the use category but the impurity profile — tell us the end use and we will map it to the specification.

For export enquiries, include the destination country and the intended application in your message. This lets us confirm whether the grade needs any additional documentation beyond the standard per-batch COA, and whether the packing suits the planned transport mode.

Packaging & Storage

Packing is per order / batch confirmation (not published) and purity is per batch COA (not published). Both are agreed at order stage; for export movements the packing is chosen with the transport mode and destination in mind, and drum, bag or repacked formats are all available. Storage: sealed, in a cool and dry place, away from direct sunlight.

Each shipment is accompanied by a batch Certificate of Analysis. For cross-border orders, MSDS, technical datasheets and third-party test reports can be issued to match your documentation set; declare the destination country when you enquire so the paperwork matches on arrival. Contact: info@591daili.com · +86-18553102138.

Quality & Documentation

COA (Certificate of Analysis) is provided with every batch. MSDS/technical data sheets and third-party test reports are available on request. Purity and packaging are subject to batch COA and order confirmation.

Molecular Character — Selection Notes

What the structure means for your process

From a process-selection standpoint, This product is an aromatic organic carrying 2 oxygen, and is close to hydrophilic-lipophilic balance, which suits emulsifying or solubilising work. defines where this material fits and where it does not. Three points deserve checking before purchase: structural type, which sets the reactive sites and compatibility; polarity class, which dictates the solvent system; and molecular-weight range, which governs dosage and dispersion feasibility.

For this product specifically: the ring backbone gives better heat and chemical stability than an aliphatic equivalent of equal carbon count, but aromatic systems oxidise and discolour readily at elevated temperature. If your process holds a hot section, run a thermal-stability comparison at the sample stage rather than discovering it in production.

How it behaves in your formulation

A balanced hydrophilic-lipophilic profile is exactly what an emulsified system needs. The molecule partitions freely between the two phases, which makes it the connecting component that removes the need for a solvent bridge.

At 120~200 g/mol, this is the most common scale in fine chemicals, balancing reactivity with handling. It works as a pharmaceutical intermediate, food additive, personal-care ingredient or functional auxiliary, and at this size supply is mature and specification availability is generally good.

If you are evaluating this as an alternative to an incumbent supplier, the difficulty for aromatic products is rarely the main component but the impurity profile. The stated impurity distribution may differ from what the incumbent actually delivers, so comparing two or three sample batches before switching is faster than chasing a deviation afterwards.

Storage, handling and documents

A few points on receipt and storage. store sealed in a cool, dry place away from direct sunlight and incompatible materials; specific handling and PPE follow the MSDS issued with the batch.. For inbound or outbound shipments, confirm packing group and transport classification in advance to avoid demurrage caused by documentation mismatch.

On documentation: the batch COA travels with every shipment; MSDS, technical datasheets and third-party test reports can be issued on request. If your quality system requires supplier qualification documents — business licence, production permit, management-system certificates — state the destination country and the document list when you enquire, and we will assemble the set at once.

Technical Profile

o-Anisaldehyde is a carbon-based organic compound with CAS registry number 135-02-4 and molecular formula C8H8O2 (molecular weight 136.15), belonging to the organic chemicals segment of chemical raw materials.

This entry belongs to the organic chemicals range, where the material is normally supplied against a stated grade rather than blended to a formula. Where a buyer works to a published standard, the useful conversation is about which data the grade is qualified against and how deviations are handled, rather than about the use category itself.

Jinan Shenghe Chemical Co., Ltd. supplies o-Anisaldehyde with stable inventory and provides a Certificate of Analysis (COA) with each batch; custom repacking is available per process requirement.

CAS number: 135-02-4 — searchable in PubChem for physicochemical, safety and regulatory data.

Its molecular formula C8H8O2 comprises 8 C, 8 H, 2 O atoms.

Also known as: o-Anisaldehyde

Category: organic chemicals

Within the organic chemicals segment, the technical questions differ from other categories. Buyers here are usually working to a specification or a standard rather than to a general description, so the useful conversation covers impurity profile, particle size or assay method, and which data the grade is qualified against.

For qualification work, we can supply a sample batch with full documentation so that incoming QC has something concrete to compare against. Mentioning the destination country at enquiry stage also lets us match the paperwork set to your import requirements.

Purity available is per batch COA (not published), with packing per order / batch confirmation (not published). Neither value is asserted in advance: every batch ships with a Certificate of Analysis carrying the measured results, so incoming QC compares against real data rather than a catalogue claim. MSDS, technical datasheets and third-party test reports can be issued for qualification purposes — state the standard you qualify against when you enquire.

Supplier: Jinan Shenghe Chemical Co., Ltd.. For export orders, state the destination country, the transport mode and the document set you need when you enquire — packing, paperwork and quotation terms all follow from those three. Samples can be arranged for qualification, and lead time depends on stock and order size rather than on a fixed promise.

Email: info@591daili.com · Tel/WhatsApp: +86-18553102138

Frequently Asked Questions

PubChem Public Data

Related Products