Ceteareth-20 (CAS 112-92-5) — formula C18H38O, molecular weight 270.5.
| CAS Number | 112-92-5 |
|---|---|
| Molecular Formula | C18H38O |
| Molecular Weight | 270.5 |
| Melting Point | 59.5 °C |
| Boiling Point | 210.5 °C at 15 mm Hg |
| LogP | 8.4 |
| Applications | Uses: CIR ingredient: Stearyl Alcohol, Used as a substitute for cetyl alcohol in pharmaceutical dispensing, in cosmetic creams and perfumery, in textile oils and finishes, as an antifoam agent, and in lubricants, resins, and surface active agents, Synthetic stearyl alcohol has been approved as a direct and indirect food additive ingredient and as an ingredient in over-the-counter drugs, [HSDB], Textiles (Printing, Dyeing, or Finishing) [Category: Industry], Substitute for cetyl alcohol in pharmaceutical dispensing, in cosmetic creams, for emulsions, textile oils and finishes, as antifoam agent, lubricant, and chemical raw material., Perfumery, cosmetics, intermediate, surface active agents, lubricants, antifoam agent., Antifoam agent, for bioprocesses, Stearyl alcohol is used in ... resins, and USP ointments. Synthetic stearyl alcohol has been approved as a direct and indirect food additive ingredient and as an ingredient in over-the-counter drugs., Use Classification: EPA Safer Chemical Functional Use Classes -> Emollients, Safer Chemical Classes -> Green circle - The chemical has been verified to be of low concern, Cosmetics -> Foam boosting, Refatting, Opacifying, Emollient, Viscosity controlling, Emulsion stabilizing, Industry Uses: Defoamer, Intermediate, Emulsifier, Not Known or Reasonably Ascertainable, Stabilizing agent, Sealant (barrier), Cleaning agent, Fuel, Antioxidant, Surfactant (surface active agent), Lubricating agent, Other, Binder, Solvent, Consumer Uses: Cleaning agent, Softener and conditioner, Household Products: Information on 828 consumer products that contain Stearyl alcohol in the following categories is provided:, • Inside the Home, • Personal Care, • Pet Care, Methods of Manufacturing: Preparation from ethyl stearate. ... Preparation of technical grade from sperm whale oil., 1-Octadecanol is, prepared commercially via Ziegler aluminum alkyl hydrolysis or the catalytic, high-pressure hydrogenation of stearyl acid, followed by filtration and distillation. It may also be derived from natural fats and oils., Formulations, Preparations: Stearyl alcohol USP...contains not less than 90% of stearyl alcohol, remainder consisting chiefly of cetyl alcohol., Hydrophilic petrolatum USP, contains, cholesterol 30 g, stearyl alcohol 30 g, white wax 80 g, & white petrolatum 860 g., Hydrophilic ointment USP, methylparaben 0.25 g, propylparaben 0.15 g, sodium lauryl sulfate 10 g, propylene glycol 120 g, stearyl alcohol 250 g, white petrolatum 250 g, purified water 370 g., Grades: Commercial, technical, USP., U.S. Production: 2023: 70, 000, 000 - <85, 000 lb, 2022: 70, 2021: 70, 2020: 70, This chemical is listed as a High Production Volume (HPV) (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and, or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B, 51FR21438)., (1986) >10 million-50 million pounds, (1990) >10 million-50 million pounds, (1994) >10 million-50 million pounds, For more U.S. Production (Complete) data for 1-OCTADECANOL (6 total), please visit the HSDB record page., General Manufacturing Information: Other (requires additional information), All Other Basic Organic Chemical Manufacturing, Petrochemical Manufacturing, Paper Manufacturing, Machinery Manufacturing, All Other Chemical Product and Preparation Manufacturing, Paint and Coating Manufacturing, Soap, Cleaning Compound, and Toilet Preparation Manufacturing, Oil and Gas Drilling, Extraction, and Support activities, Petroleum Lubricating Oil and Grease Manufacturing, Pesticide, Fertilizer, and Other Agricultural Chemical Manufacturing, Mining (except Oil and Gas) and support activities, 1-Octadecanol: ACTIVE, Stenol is a mixture of solid alcohols, principally stearyl alcohol., It is, a surface-active agent used to stabilize emulsions & increase their ability to retain large quantities of water. |
Documented applications: Uses: CIR ingredient: Stearyl Alcohol, Used as a substitute for cetyl alcohol in pharmaceutical dispensing, in cosmetic creams and perfumery, in textile oils and finishes, as an antifoam agent, and in lubricants, resins, and surface active agents, Synthetic stearyl alcohol has been approved as a direct and indirect food additive ingredient and as an ingredient in over-the-counter drugs, [HSDB], Textiles (Printing, Dyeing, or Finishing) [Category: Industry], Substitute for cetyl alcohol in pharmaceutical dispensing, in cosmetic creams, for emulsions, textile oils and finishes, as antifoam agent, lubricant, and chemical raw material., Perfumery, cosmetics, intermediate, surface active agents, lubricants, antifoam agent., Antifoam agent, for bioprocesses, Stearyl alcohol is used in ... resins, and USP ointments. Synthetic stearyl alcohol has been approved as a direct and indirect food additive ingredient and as an ingredient in over-the-counter drugs., Use Classification: EPA Safer Chemical Functional Use Classes -> Emollients, Safer Chemical Classes -> Green circle - The chemical has been verified to be of low concern, Cosmetics -> Foam boosting, Refatting, Opacifying, Emollient, Viscosity controlling, Emulsion stabilizing, Industry Uses: Defoamer, Intermediate, Emulsifier, Not Known or Reasonably Ascertainable, Stabilizing agent, Sealant (barrier), Cleaning agent, Fuel, Antioxidant, Surfactant (surface active agent), Lubricating agent, Other, Binder, Solvent, Consumer Uses: Cleaning agent, Softener and conditioner, Household Products: Information on 828 consumer products that contain Stearyl alcohol in the following categories is provided:, • Inside the Home, • Personal Care, • Pet Care, Methods of Manufacturing: Preparation from ethyl stearate. ... Preparation of technical grade from sperm whale oil., 1-Octadecanol is, prepared commercially via Ziegler aluminum alkyl hydrolysis or the catalytic, high-pressure hydrogenation of stearyl acid, followed by filtration and distillation. It may also be derived from natural fats and oils., Formulations, Preparations: Stearyl alcohol USP...contains not less than 90% of stearyl alcohol, remainder consisting chiefly of cetyl alcohol., Hydrophilic petrolatum USP, contains, cholesterol 30 g, stearyl alcohol 30 g, white wax 80 g, & white petrolatum 860 g., Hydrophilic ointment USP, methylparaben 0.25 g, propylparaben 0.15 g, sodium lauryl sulfate 10 g, propylene glycol 120 g, stearyl alcohol 250 g, white petrolatum 250 g, purified water 370 g., Grades: Commercial, technical, USP., U.S. Production: 2023: 70, 000, 000 - <85, 000 lb, 2022: 70, 2021: 70, 2020: 70, This chemical is listed as a High Production Volume (HPV) (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and, or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B, 51FR21438)., (1986) >10 million-50 million pounds, (1990) >10 million-50 million pounds, (1994) >10 million-50 million pounds, For more U.S. Production (Complete) data for 1-OCTADECANOL (6 total), please visit the HSDB record page., General Manufacturing Information: Other (requires additional information), All Other Basic Organic Chemical Manufacturing, Petrochemical Manufacturing, Paper Manufacturing, Machinery Manufacturing, All Other Chemical Product and Preparation Manufacturing, Paint and Coating Manufacturing, Soap, Cleaning Compound, and Toilet Preparation Manufacturing, Oil and Gas Drilling, Extraction, and Support activities, Petroleum Lubricating Oil and Grease Manufacturing, Pesticide, Fertilizer, and Other Agricultural Chemical Manufacturing, Mining (except Oil and Gas) and support activities, 1-Octadecanol: ACTIVE, Stenol is a mixture of solid alcohols, principally stearyl alcohol., It is, a surface-active agent used to stabilize emulsions & increase their ability to retain large quantities of water..
Ceteareth-20 is a chemical compound with CAS registry number 112-92-5 and molecular formula C18H38O (molecular weight 270.5).
CAS number: 112-92-5
Its molecular formula C18H38O comprises 18 C, 38 H, 1 O atoms.
Also known as: Ceteareth-20 · Stearyl Alcohol · C18 Alcohol
The CAS registry number of Ceteareth-20 is 112-92-5.
Molecular formula C18H38O, molecular weight 270.5.
It is also registered under: Ceteareth-20, Stearyl Alcohol, C18 Alcohol.
Recorded applications: Uses: CIR ingredient: Stearyl Alcohol, Used as a substitute for cetyl alcohol in pharmaceutical dispensing, in cosmetic creams and perfumery, in textile oils and finishes, as an antifoam agent, and in lubricants, resins, and surface active agents, Synthetic stearyl alcohol has been approved as a direct and indirect food additive ingredient and as an ingredient in over-the-counter drugs, [HSDB], Textiles (Printing, Dyeing, or Finishing) [Category: Industry], Substitute for cetyl alcohol in pharmaceutical dispensing, in cosmetic creams, for emulsions, textile oils and finishes, as antifoam agent, lubricant, and chemical raw material., Perfumery, cosmetics, intermediate, surface active agents, lubricants, antifoam agent., Antifoam agent, for bioprocesses, Stearyl alcohol is used in ... resins, and USP ointments. Synthetic stearyl alcohol has been approved as a direct and indirect food additive ingredient and as an ingredient in over-the-counter drugs., Use Classification: EPA Safer Chemical Functional Use Classes -> Emollients, Safer Chemical Classes -> Green circle - The chemical has been verified to be of low concern, Cosmetics -> Foam boosting, Refatting, Opacifying, Emollient, Viscosity controlling, Emulsion stabilizing, Industry Uses: Defoamer, Intermediate, Emulsifier, Not Known or Reasonably Ascertainable, Stabilizing agent, Sealant (barrier), Cleaning agent, Fuel, Antioxidant, Surfactant (surface active agent), Lubricating agent, Other, Binder, Solvent, Consumer Uses: Cleaning agent, Softener and conditioner, Household Products: Information on 828 consumer products that contain Stearyl alcohol in the following categories is provided:, • Inside the Home, • Personal Care, • Pet Care, Methods of Manufacturing: Preparation from ethyl stearate. ... Preparation of technical grade from sperm whale oil., 1-Octadecanol is, prepared commercially via Ziegler aluminum alkyl hydrolysis or the catalytic, high-pressure hydrogenation of stearyl acid, followed by filtration and distillation. It may also be derived from natural fats and oils., Formulations, Preparations: Stearyl alcohol USP...contains not less than 90% of stearyl alcohol, remainder consisting chiefly of cetyl alcohol., Hydrophilic petrolatum USP, contains, cholesterol 30 g, stearyl alcohol 30 g, white wax 80 g, & white petrolatum 860 g., Hydrophilic ointment USP, methylparaben 0.25 g, propylparaben 0.15 g, sodium lauryl sulfate 10 g, propylene glycol 120 g, stearyl alcohol 250 g, white petrolatum 250 g, purified water 370 g., Grades: Commercial, technical, USP., U.S. Production: 2023: 70, 000, 000 - <85, 000 lb, 2022: 70, 2021: 70, 2020: 70, This chemical is listed as a High Production Volume (HPV) (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and, or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B, 51FR21438)., (1986) >10 million-50 million pounds, (1990) >10 million-50 million pounds, (1994) >10 million-50 million pounds, For more U.S. Production (Complete) data for 1-OCTADECANOL (6 total), please visit the HSDB record page., General Manufacturing Information: Other (requires additional information), All Other Basic Organic Chemical Manufacturing, Petrochemical Manufacturing, Paper Manufacturing, Machinery Manufacturing, All Other Chemical Product and Preparation Manufacturing, Paint and Coating Manufacturing, Soap, Cleaning Compound, and Toilet Preparation Manufacturing, Oil and Gas Drilling, Extraction, and Support activities, Petroleum Lubricating Oil and Grease Manufacturing, Pesticide, Fertilizer, and Other Agricultural Chemical Manufacturing, Mining (except Oil and Gas) and support activities, 1-Octadecanol: ACTIVE, Stenol is a mixture of solid alcohols, principally stearyl alcohol., It is, a surface-active agent used to stabilize emulsions & increase their ability to retain large quantities of water..
Independent reference data for Ceteareth-20 (CAS 112-92-5), compiled from public chemistry databases.
| CAS Registry Number | 112-92-5 |
|---|---|
| PubChem CID | 8221 |
| Molecular formula | C18H38O |
| IUPAC name | octadecan-1-ol |
| UNII (FDA) | 2KR89I4H1Y |
| Molecular Weight | 270.5 |
|---|---|
| XLogP3 | 8.4 |
| Hydrogen Bond Donor Count | 1 |
| Hydrogen Bond Acceptor Count | 1 |
| Rotatable Bond Count | 16 |
| Exact Mass | 270.292265831 |
| Monoisotopic Mass | 270.292265831 |
| Topological Polar Surface Area | 20.2 |
| Heavy Atom Count | 19 |
| Boiling Point | 210.5 °C at 15 mm Hg |
|---|---|
| Boiling Point | 336 °C |
| Boiling Point | 202 °C @760 [mm Hg] |
| Melting Point | 59.5 °C |
| Melting Point | 59.8 °C |
| Melting Point | 58 °C |
| Flash Point | 200 °C |
| Flash Point | 392 °F (200 °C) (Closed cup) |
| Flash Point | 170 °C |
| Solubility | In water, 1.1X10-3 mg/L at 25 °C |
Stearyl alcohol; 1-OCTADECANOL; Octadecan-1-ol; 112-92-5; 1-Hydroxyoctadecane; Octadecyl alcohol; n-Octadecanol; Stearol; Stearic alcohol; n-Octadecyl alcohol; Atalco S; n-1-Octadecanol; Steraffine; Alfol 18; Sipol S; Alcohol stearylicus
| Regulatory & Food Contact | EU Flavoring substances FDA Substance added to food: SURFACE-FINISHING AGENT, TEXTURIZER FDA Inventory of Food Contact Substances Listed in 21 CFR: FCS Flavoring Agents Use in margarine, shortening, and food products that require the use of semi-solid and solid fats as a texturi Scientific procedures |
|---|---|
| GHS notification summary | 61.7% (1186 / 1921) |
| GHS notification summary | 61.7% (1186 / 1921) |
|---|---|
| Reported hazard statements | H319 (23.1%), H400 (15%), H411 (15.4%), H412 (15%) |
This chemical does not meet GHS hazard criteria for 61.7% (1186 of 1921) of all reports.
H319 (23.1%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]
C18 Alcohol · CAS 112-92-5 · C18H38O. UNII 2KR89I4H1Y. Boiling Point: 210.5 °C at 15 mm Hg; Boiling Point: 336 °C; Boiling Point: 202 °C @760 [mm Hg].
Source: PubChem / Wikidata; the batch COA governs where values differ.
Supplier: Jinan Shenghe Chemical Co., Ltd.
中文页面: Ceteareth-20