thiamine (CAS 59-43-8): Properties, Molar Dosing and a Sourcing Checklist
thiamine (CAS 59-43-8; InChIKey JZRWCGZRTZMZEH-UHFFFAOYSA-N) is a chemical raw material used in Food & Feed Raw Materials, with formula C12H17N4OS+ and molecular weight 265.36 g/mol. This page lists database-verifiable properties, what those values imply for formulation and QC, and a specification checklist for Food & Feed Raw Materials applications.
Key takeaways
- XLogP = 1 sits in an intermediate range: solubility cannot be assumed from experience. Run a bench test at the target pH and temperature and specify measured solubility as the acceptance criterion.
- TPSA 104 Ų and 2 H-bond donors / 5 acceptors mean hydrogen bonding with alcohol-, water- or amide-containing systems warrants a viscosity and clarity check after blending.
- Molecular weight 265.36 g/mol: 1 mol = 265.36 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 265.11230735 supports HRMS identification (add a proton for [M+H]+).
- InChIKey JZRWCGZRTZMZEH-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.
Published properties of thiamine (by CAS 59-43-8)
| Property | Value |
|---|---|
| Molecular formula | C12H17N4OS+ |
| Molecular weight | 265.36 g/mol |
| Accurate mass | 265.11230735 |
| IUPAC name | 2-[3-[(4-amino-2-methylpyrimidin-5-yl)methyl]-4-methyl-1,3-thiazol-3-ium-5-yl]ethanol |
| InChIKey | JZRWCGZRTZMZEH-UHFFFAOYSA-N |
| XLogP | 1 |
| Topological polar surface area | 104 Ų |
| H-bond donors / acceptors | 2 / 5 |
| Rotatable bonds | 4 |
| Heavy atoms | 18 |
Computed values above: PubChem CID 1130; melting/boiling points, where shown, come from the site product page.
What the numbers mean in practice
| Aspect | Evidence and actionable conclusion |
|---|---|
| Solubility & compatibility | XLogP = 1 sits in an intermediate range: solubility cannot be assumed from experience. Run a bench test at the target pH and temperature and specify measured solubility as the acceptance criterion. |
| Molecular polarity | TPSA 104 Ų and 2 H-bond donors / 5 acceptors mean hydrogen bonding with alcohol-, water- or amide-containing systems warrants a viscosity and clarity check after blending. |
| Dosing & analytical checks | Molecular weight 265.36 g/mol: 1 mol = 265.36 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 265.11230735 supports HRMS identification (add a proton for [M+H]+). |
| Substance identity | InChIKey JZRWCGZRTZMZEH-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups. |
| Crystallisation & incoming QC | 4 rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay. |
Specification checklist for Food & Feed Raw Materials use
| Check | Why it matters | How to verify |
|---|---|---|
| Batch baseline (CAS 59-43-8) | Product-specific values to check line by line against the COA and specification; salts and hydrates differ | 分子量 265.36 g/mol; XLogP 1; TPSA 104 Ų; InChIKey JZRWCGZRTZMZEH-UHFFFAOYSA-N |
| Grade & regulatory fit | Food/feed and industrial grades carry different statutory limits | Request the grade-specific COA and production licence; check against GB 1886 / FCC / USP or the customer spec |
| Batch-level safety indices | Heavy metals, arsenic, microbes and residual solvents are statutory; assay alone does not establish compliance | Match report lot numbers to the COA, retain samples and arrange third-party retest for critical lots |
| Assay basis & hydration | Anhydrous vs hydrated mass changes both dosing and settlement | State the assay basis in the contract; verify by loss on drying or Karl Fischer |
| Packaging & arrival retest | Hygroscopic materials cake and drift in assay after moisture uptake | Use moisture-barrier liners; retest water content and appearance on arrival with ambient humidity logged |
Frequently asked questions
What are the formula, molecular weight and identifiers of thiamine (CAS 59-43-8)?
Formula C12H17N4OS+, molecular weight 265.36 g/mol; accurate mass 265.11230735. CAS 59-43-8 resolves the substance across PubChem and ChemSpider; InChIKey JZRWCGZRTZMZEH-UHFFFAOYSA-N distinguishes same-name substances, salts and hydrates. Use the molecular weight for stoichiometric conversion; purity and grade follow the batch COA.
Is thiamine suitable for Food & Feed Raw Materials applications, and what should be checked first?
Three checks: (1) the regulatory grade and production licence for the intended use; (2) impurity and safety indices plus test methods on the batch COA; (3) identity via CAS and substance identifiers to rule out hydrate/anhydrous or salt/free-form mix-ups. With XLogP 1 and TPSA 104 Ų, validate aqueous versus oil-phase dispersion by a bench test before fixing the addition method.
How is the dosage of thiamine calculated from molecular weight?
At 265.36 g/mol, 1 mol = 265.36 g. Blending, substitution and neutralisation should be calculated on molar equivalence, not by substituting mass parts of a related material. For hydrates or salts, adjust for active content and water of crystallisation from the COA.
What incoming-QC tests apply to thiamine on arrival?
At minimum: match the COA lot to the goods; retest assay and loss on drying / water; confirm identity via InChIKey JZRWCGZRTZMZEH-UHFFFAOYSA-N or spectroscopy; retain a sample with opening conditions logged. Caking, colour shift or a broad melting range should trigger polymorph and residual-solvent checks.
Related materials
- 4 anisic acid(CAS 100-09-4):CAS 100-09-4: listed in the same Food & Feed Raw Materials directory — compare grade, test method and COA items
- 4 dimethylamino benzaldehyde(CAS 100-10-7):shares the 'amin' core; before substituting, check the CAS and molecular-weight gap, as salt formation adds a counter-ion
- terephthalic acid(CAS 100-21-0):CAS 100-21-0: when used in Food & Feed Raw Materials formulations, confirm addition order by a bench test before dosing
- 2 5 pyridinedicarboxylic acid(CAS 100-26-5):CAS 100-26-5: listed in the same Food & Feed Raw Materials directory — compare grade, test method and COA items
- 2 diethylaminoethanethiol(CAS 100-38-9):shares the 'amin' core; before substituting, check the CAS and molecular-weight gap, as salt formation adds a counter-ion
- cyclamic acid(CAS 100-88-9):CAS 100-88-9: when used in Food & Feed Raw Materials formulations, confirm addition order by a bench test before dosing
For side-by-side comparison see site search for thiamine, or browse the Organic Chemicals directory.
Supply & compliance
Jinan Shenghe Chemical Co., Ltd. supplies industrial and fine chemicals. When enquiring, state the product name, CAS, target grade and packaging; COA, SDS and technical data sheets are available with the shipment. Contact: info@chemsp.cn | +86-18553102138. This page is technical information for industrial raw materials; regulated food, feed, cosmetic or pharmaceutical uses require the corresponding grade and compliance with local rules.
Data sources
Source: PubChem computed properties, CID 1130 (https://pubchem.ncbi.nlm.nih.gov/compound/1130), accessed 2026-11-13; melting/boiling points, where shown, come from the site product page. Hydrates and salts carry different values — verify by CAS and InChIKey.