2-AMINOACETOPHENONE (CAS 551-93-9) sourcing notes: practical points for Organic Chemicals
2-AMINOACETOPHENONE (CAS 551-93-9; InChIKey GTDQGKWDWVUKTI-UHFFFAOYSA-N) is a chemical raw material used in Industrial Chemicals, with formula C8H9NO and molecular weight 135.16 g/mol. This page lists database-verifiable properties, what those values imply for formulation and QC, and a specification checklist for Industrial Chemicals applications.
Key takeaways
- XLogP = 1.6 sits in an intermediate range: solubility cannot be assumed from experience. Run a bench test at the target pH and temperature and specify measured solubility as the acceptance criterion.
- TPSA 43 Ų and 1 H-bond donors / 2 acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils.
- Molecular weight 135.16 g/mol: 1 mol = 135.16 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 135.068413911 supports HRMS identification (add a proton for [M+H]+).
- InChIKey GTDQGKWDWVUKTI-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.
Published properties of 2-AMINOACETOPHENONE (by CAS 551-93-9)
| Property | Value |
|---|---|
| Molecular formula | C8H9NO |
| Molecular weight | 135.16 g/mol |
| Accurate mass | 135.068413911 |
| IUPAC name | 1-(2-aminophenyl)ethanone |
| InChIKey | GTDQGKWDWVUKTI-UHFFFAOYSA-N |
| XLogP | 1.6 |
| Topological polar surface area | 43.1 Ų |
| H-bond donors / acceptors | 1 / 2 |
| Rotatable bonds | 1 |
| Heavy atoms | 10 |
| Melting point (product page) | 20 °C |
| Boiling point (product page) | 85.00 °C |
Computed values above: PubChem CID 11086; melting/boiling points, where shown, come from the site product page.
What the numbers mean in practice
| Aspect | Evidence and actionable conclusion |
|---|---|
| Solubility & compatibility | XLogP = 1.6 sits in an intermediate range: solubility cannot be assumed from experience. Run a bench test at the target pH and temperature and specify measured solubility as the acceptance criterion. |
| Molecular polarity | TPSA 43 Ų and 1 H-bond donors / 2 acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils. |
| Dosing & analytical checks | Molecular weight 135.16 g/mol: 1 mol = 135.16 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 135.068413911 supports HRMS identification (add a proton for [M+H]+). |
| Substance identity | InChIKey GTDQGKWDWVUKTI-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups. |
| Crystallisation & incoming QC | 1 rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay. |
Specification checklist for Industrial Chemicals use
| Check | Why it matters | How to verify |
|---|---|---|
| Batch baseline (CAS 551-93-9) | Product-specific values to check line by line against the COA and specification; salts and hydrates differ | 分子量 135.16 g/mol; XLogP 1.6; TPSA 43 Ų; InChIKey GTDQGKWDWVUKTI-UHFFFAOYSA-N |
| Specification & method | Assay basis can differ for the same name | State indices, test method and acceptance rules in the contract |
| Impurities & lot consistency | Trace impurities often explain performance differences | Request impurity profiles and recent COAs; compare key indices |
| Identity check | Same-name, salt-form and hydrate confusion causes dosing errors | Cross-check CAS and InChIKey; confirm by spectroscopy where needed |
| Packaging, storage & retest | Transit conditions change the state on arrival | Check SDS storage and retest date; retain and retest on arrival |
Frequently asked questions
What are the formula, molecular weight and identifiers of 2-AMINOACETOPHENONE (CAS 551-93-9)?
Formula C8H9NO, molecular weight 135.16 g/mol; accurate mass 135.068413911. CAS 551-93-9 resolves the substance across PubChem and ChemSpider; InChIKey GTDQGKWDWVUKTI-UHFFFAOYSA-N distinguishes same-name substances, salts and hydrates. Use the molecular weight for stoichiometric conversion; purity and grade follow the batch COA.
Is 2-AMINOACETOPHENONE suitable for Industrial Chemicals applications, and what should be checked first?
Three checks: (1) the regulatory grade and production licence for the intended use; (2) impurity and safety indices plus test methods on the batch COA; (3) identity via CAS and substance identifiers to rule out hydrate/anhydrous or salt/free-form mix-ups. With XLogP 1.6 and TPSA 43 Ų, validate aqueous versus oil-phase dispersion by a bench test before fixing the addition method.
How is the dosage of 2-AMINOACETOPHENONE calculated from molecular weight?
At 135.16 g/mol, 1 mol = 135.16 g. Blending, substitution and neutralisation should be calculated on molar equivalence, not by substituting mass parts of a related material. For hydrates or salts, adjust for active content and water of crystallisation from the COA.
What incoming-QC tests apply to 2-AMINOACETOPHENONE on arrival?
At minimum: match the COA lot to the goods; retest assay and loss on drying / water; confirm identity via InChIKey GTDQGKWDWVUKTI-UHFFFAOYSA-N or spectroscopy; retain a sample with opening conditions logged. Caking, colour shift or a broad melting range should trigger polymorph and residual-solvent checks.
Related materials
- o 2 hydroxyethyl choline(CAS 41830-55-1):CAS 41830-55-1: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
- o 2 diethylamino ethoxy benzoic acid methyl ester(CAS 5014-25-5):shares the 'amino' core; before substituting, check the CAS and molecular-weight gap, as salt formation adds a counter-ion
- o 2r 2 butanoyloxy 3 propanoyloxy propyl oxy hydroxy phospho(CAS 51446-62-9):CAS 51446-62-9: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing
- o 2 chloro 1 methoxyethoxy phenyl methylcarbamate(CAS 51487-69-5):shares the 'phen' parent fragment — compare formula and molecular weight to identify salt, ester or hydrate form
- o 2 4 dichlorophenyl methyl hydroxylamine(CAS 52370-40-8):shares the 'ophen' core; before substituting, check the CAS and molecular-weight gap, as salt formation adds a counter-ion
- o 2 butenyloxy benzamide(CAS 91132-71-7):CAS 91132-71-7: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing
For side-by-side comparison see site search for 2-AMINOACETOPHENONE, or browse the Organic Chemicals directory.
Supply & compliance
Jinan Shenghe Chemical Co., Ltd. supplies industrial and fine chemicals. When enquiring, state the product name, CAS, target grade and packaging; COA, SDS and technical data sheets are available with the shipment. Contact: info@chemsp.cn | +86-18553102138. This page is technical information for industrial raw materials; regulated food, feed, cosmetic or pharmaceutical uses require the corresponding grade and compliance with local rules.
Data sources
Source: PubChem computed properties, CID 11086 (https://pubchem.ncbi.nlm.nih.gov/compound/11086), accessed 2026-11-09; melting/boiling points, where shown, come from the site product page. Hydrates and salts carry different values — verify by CAS and InChIKey.
Related Products
- o 2 hydroxyethyl choline (CAS 41830-55-1)
- o 2 diethylamino ethoxy benzoic acid methyl ester (CAS 5014-25-5)
- o 2r 2 butanoyloxy 3 propanoyloxy propyl oxy hydroxy phospho (CAS 51446-62-9)
- o 2 chloro 1 methoxyethoxy phenyl methylcarbamate (CAS 51487-69-5)
- o 2 4 dichlorophenyl methyl hydroxylamine (CAS 52370-40-8)
- o 2 butenyloxy benzamide (CAS 91132-71-7)