Resin acids and Rosin acids, esters with glycerol (CAS 8050-31-5): Properties, Molar Dosing and a Sourcing Checklist
Resin acids and Rosin acids, esters with glycerol,When verifying supplier certificates or reconciling inbound shipments for formulating operations, the primary challenge lies in distinguishing glycerol esters of rosin from standard modified rosin resins, as their chemical behaviors differ significantly despite similar origins. In the Paints & Coatings domain, identifying this specific material as CAS 8050-31-5 is critical for quality control. Procurement teams must ensure that the technical data sheets explicitly confirm the esterification with glycerol rather than just listing generic rosin acid content. This distinction is vital because the glycerol ester structure impacts film-forming properties and solubility profiles. Relying solely on visual inspection or basic acidity tests can lead to incorrect batch acceptance. Therefore, strict adherence to the CAS registry number and explicit nomenclature regarding the ester linkage is the most reliable method to prevent material confusion in production records.
Key takeaways
- No complete computed property record is published for CAS 8050-31-5: obtain property values and their source from the supplier for the specification, SDS and COA rather than estimating from related substances.
- Compatibility & dispersion: Resin and pigment compatibility governs gloss and storage stability. Run let-down and compatibility tests; watch for flocculation and viscosity rise.
- Volatiles & residues: Residual solvent affects film formation, odour and VOC compliance. Check GC residual solvents and boiling range; calculate VOC contribution.
- With formula and molecular weight unpublished, dose Resin acids and Rosin acids, esters with glycerol from the batch COA active content and equivalent basis; salt and hydrate forms are not interchangeable by mass.
Published properties of Resin acids and Rosin acids, esters with glycerol (by CAS 8050-31-5)
No citable published property record exists for this CAS. Estimated values are deliberately omitted; request a sourced COA/SDS for formula, molecular weight or melting point.
Omitted fields are not estimated.
Specification checklist for Paints & Coatings use
| Check | Why it matters | How to verify |
|---|---|---|
| Compatibility & dispersion | Resin and pigment compatibility governs gloss and storage stability | Run let-down and compatibility tests; watch for flocculation and viscosity rise |
| Volatiles & residues | Residual solvent affects film formation, odour and VOC compliance | Check GC residual solvents and boiling range; calculate VOC contribution |
| Functionality & reactivity | Determines crosslink density and cure schedule | Verify hydroxyl/acid/epoxy value and convert by equivalent weight |
| Storage stability | Moisture or self-polymerisation raises viscosity and causes gelation | Check inhibitor, water content and shelf life; run accelerated heat-storage tests |
Frequently asked questions
How can the identity of Resin acids and Rosin acids, esters with glycerol (CAS 8050-31-5) be confirmed?
No computed property record is published for this CAS, so do not cite estimated values. Request a sourced COA and SDS against CAS 8050-31-5, check the name, salt form, hydration state and test methods, and confirm by NMR or LC-MS where same-name ambiguity exists.
Is Resin acids and Rosin acids, esters with glycerol suitable for Paints & Coatings applications, and what should be checked first?
Three checks: (1) the regulatory grade and production licence for the intended use; (2) impurity and safety indices plus test methods on the batch COA; (3) identity via CAS and substance identifiers to rule out hydrate/anhydrous or salt/free-form mix-ups. With limited published property data, determine solubility and addition method by bench testing rather than inference from related materials.
How is the dosage of Resin acids and Rosin acids, esters with glycerol calculated from molecular weight?
No published molecular weight is available; request the assay and specification basis on the COA before calculating molar dosage.
What incoming-QC tests apply to Resin acids and Rosin acids, esters with glycerol on arrival?
At minimum: match the COA lot to the goods; retest assay and loss on drying / water; confirm identity via InChIKey the substance identifier or spectroscopy; retain a sample with opening conditions logged. Caking, colour shift or a broad melting range should trigger polymorph and residual-solvent checks.
Related materials
- HEXAEPOXYSQUALENE(CAS 10008-64-7):CAS 10008-64-7: listed in the same Paints & Coatings directory — compare grade, test method and COA items
- 1,2-EPOXYPENTANE(CAS 1003-14-1):CAS 1003-14-1: a separate CAS entry; compare impurity limits and packaging conditions for Paints & Coatings use
- DIPHENYLMETHYLENEDIISOCYANATE(CAS 10031-75-1):CAS 10031-75-1: when used in Paints & Coatings formulations, confirm addition order by a bench test before dosing
- titanium(ii) chloride(CAS 10049-06-6):CAS 10049-06-6: listed in the same Paints & Coatings directory — compare grade, test method and COA items
- (-)-Epipinoresinol(CAS 10061-38-8):shares the 'resin' core; before substituting, check the CAS and molecular-weight gap, as salt formation adds a counter-ion
- 9beta,11beta-epoxy-17,21-dihydroxypregn-4-ene-3,20-dione(CAS 10072-97-6):CAS 10072-97-6: when used in Paints & Coatings formulations, confirm addition order by a bench test before dosing
For side-by-side comparison see site search for Resin acids and Rosin acids, esters with glycerol, or browse the Organic Chemicals directory.
Supply & compliance
Jinan Shenghe Chemical Co., Ltd. supplies industrial and fine chemicals. When enquiring, state the product name, CAS, target grade and packaging; COA, SDS and technical data sheets are available with the shipment. Contact: info@chemsp.cn | +86-18553102138. This page is technical information for industrial raw materials; regulated food, feed, cosmetic or pharmaceutical uses require the corresponding grade and compliance with local rules.
Data sources
Source: the site product registry. No PubChem computed record was found for this CAS; missing fields are omitted rather than estimated. Batch COA governs the specification.